840AMU-86121Z - Leland Maximum Inflation Re-Arm Kit D 38G Manual 3/8" Threads

Re-Arm Kit D 38G Manual 3/8" Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 3/8" threads, one Green Indicator Pin, and step-by-step instructions. Use with Manual Pull PFD devices with 840 Series Inflator. Do not use it with a self-inflating PFD. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Manual Pull PFD devices with 840 Series Inflator
• Do not use with self-inflating PFD
• Includes one 38-gram CO2 cylinder with 3/8" threads, one Green Indicator Pin, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time.  Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to  and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit D 38G Manual with 3/8" Threads, part number 840AMU-86121Z, is a maintenance component designed for specific inflatable life jackets. This kit provides the necessary parts to restore a manual pull Personal Flotation Device (PFD) for continued use after deployment. It is intended for IT hardware resellers serving clients who utilize manual inflatable PFDs in their operational environments, such as maritime logistics or field service teams where safety equipment requires regular upkeep. The kit includes one 38-gram CO2 cylinder with 3/8" threads, a Green Indicator Pin, and step-by-step instructions. It is crucial to note that this kit is exclusively for Manual Pull PFD devices equipped with an 840 Series Inflator and is not compatible with self-inflating PFDs. Proper matching of the re-arming kit to the PFD's owner's manual is essential for safety and functionality, as using an incorrect kit can pose risks. Each kit is for single use; once the CO2 cartridge is punctured, it must be replaced.