V90000-85202Z - Leland Maximum Inflation Re-Arm Kit Q 33G Auto 1/2" Threads

Re-Arm Kit Q 33G Auto 1/2" Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 33-gram CO2 cylinder with 1/2" threads, a green indicator clip, and step-by-step re-arming instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Auto/Manual Pull PFD devices
• Includes one 33-gram CO2 cylinder with 1/2" threads, one Yellow Bobbin/Water Sensing Element, one Green Indicator Clip, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time.  Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to  and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit Q 33G Auto 1/2" Threads (V90000-85202Z) is a maintenance component designed for specific inflatable life vests. This kit is intended for IT hardware resellers serving clients who utilize inflatable personal flotation devices (PFDs) in their operations, such as those in marine industries or field services where water safety is a concern. It provides the necessary parts to re-arm a compatible inflatable life jacket after deployment, extending its service life. Each kit includes a single 33-gram CO2 cylinder with 1/2" threads, a Yellow Bobbin/Water Sensing Element, a Green Indicator Clip, and step-by-step re-arming instructions. This product addresses the need for reliable replacement components to ensure the continued functionality and safety compliance of auto/manual pull PFD devices. Users must verify compatibility with their specific PFD model's owner's manual to prevent misuse and ensure operational safety.