V86000-86202Z - Leland Maximum Inflation Re-Arm Kit J 38G Auto Bayonet

Re-Arm Kit J 38G Auto Bayonet

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with a black bayonet, bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Auto/Manual Pull PFD devices
• Includes one 38-gram CO2 cylinder with Black Bayonet, Yellow Bobbin/Water Sensing Element, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time.  Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to  and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit J 38G Auto Bayonet (part number V86000-86202Z) is a maintenance component designed for specific inflatable life vests. This kit is intended for IT hardware resellers or businesses that supply safety equipment for marine or water-related operations where inflatable personal flotation devices (PFDs) are utilized. It enables the re-arming of PFDs after deployment, extending their service life. Each kit includes one 38-gram CO2 cylinder with a black bayonet, a yellow bobbin/water sensing element, and detailed re-arming instructions. This product is suitable for use with Auto/Manual Pull PFD devices. Proper selection is critical; users must verify compatibility with their specific inflatable life jacket's owner's manual to ensure safe and effective operation. The kit is UL Marine Classified, indicating its suitability for marine applications.