840AMU-84121Z - Leland Maximum Inflation Re-Arm Kit G 25G Manual 3/8" Threads

Re-Arm Kit G 25G Manual 3/8" Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 25-gram CO2 cylinder with 3/8" threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Manual Pull PFD devices
• Do not use with self-inflating PFD
• Includes one 25-gram CO2 cylinder with 3/8" threads, Green Indicator Pin, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time.  Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to  and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit G 25G Manual with 3/8" Threads is designed for restoring the functionality of inflatable life vests. This kit is specifically for use with Manual Pull PFD devices and is not compatible with self-inflating PFDs. It addresses the need for replacing depleted CO2 cylinders after a single use, extending the service life of compatible inflatable life jackets. Each kit, identified by part number 840AMU-84121Z, includes a 25-gram CO2 cylinder with 3/8" threads, a green indicator pin, and re-arming instructions. Proper selection is critical; users must verify compatibility with their specific PFD model's owner's manual to ensure safe operation. This product is suitable for businesses or individuals managing safety equipment for marine or water-related operations where manual inflatable PFDs are in use and require periodic re-arming.