840AMU-85202Z - Leland Maximum Inflation Re-Arm Kit C 33G Manual 1/2" Threads

Re-Arm Kit C 33G Manual 1/2" Threads

Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 33-gram CO2 cylinder with 1/2" threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong rearming kit can be dangerous.

Features:

• For re-arming inflatable life vests
• Use with Manual Pull PFD devices
• Do not use with self-inflating PFD
• Includes one 33-gram CO2 cylinder with 1/2" threads, one Green Indicator Pin, and Instructions
• UL Marine Classified

CAUTION: This product can only be used one time.  Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.

WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.

WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to  and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.

The Leland Maximum Inflation Re-Arm Kit C 33G Manual 1/2" Threads, part number 840AMU-85202Z, is a replacement kit designed for maintaining manual pull inflatable life jackets. This product is intended for businesses and organizations that operate with watercraft and require their personnel to use inflatable PFDs. It addresses the need for regular re-arming of these safety devices after deployment, ensuring continued operational readiness and compliance with safety standards. Each kit provides the necessary components to restore a deployed manual inflation PFD for another season of use. It includes one 33-gram CO2 cylinder with 1/2" threads, a green indicator pin, and step-by-step re-arming instructions. This kit is specifically for manual pull PFD devices and should not be used with self-inflating PFDs. Proper matching of the re-arming kit to the PFD's owner's manual is crucial for safe operation.