The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and are available in either bright white or traditional black. Bulkhead mounting bracket is provided. Two versions are available:
PI-2: Designed for communication between only two points. A single call button sounds a buzzer and illuminates an indicator lamp on the companion phone. Available singly or as a set with 40' of interconnect wire, fuse, terminal lugs and mounting hardware.
PI-2 SET: Two station phone set, 40' interconnect wire, fuse, lugs, mounting hardware; 5 lbs.
PI-10:For multiple station calling capability. Up to 10 phones may be interconnected, and each phone has 10 call buttons. Sold individually-- see wiring requirements below.
Phone-Com Wiring: For PI-2, use 5 conductor wire. For PI-10, add 3 to the total number of stations to determine minimum number of conductors required.
Note: Phones are not waterproof and should be installed in a protected location
The Newmar 2 Station Intercom System, part number 117-1022-5, is a wired, point-to-point communication solution designed for direct voice contact within a defined area, such as a vessel. This system facilitates communication between two specific points, making it suitable for environments requiring dedicated, reliable intercommunication without complex networking. It operates on 12 VDC and is constructed from high-impact plastic for durability. Each station features a call button that activates a buzzer and indicator lamp on the companion phone, simplifying call initiation. The system is available in black and includes a bulkhead mounting bracket for installation. This PI-2 set is intended for buyers needing a complete two-station intercom package, including interconnect wire and necessary hardware, for straightforward deployment in protected indoor locations.
The PI-2 SET includes two intercom stations, 40 feet of interconnect wire, a fuse, terminal lugs, and mounting hardware for installation.
The Newmar 2 Station Intercom System operates on 12 VDC power.
The phones are not waterproof and should be installed in a protected location, making them suitable for indoor or covered marine applications.
The PI-2 system requires 5-conductor wire for interconnection between the two stations.
117-1022-5 - Newmar Power Newmar 2 Station Intercom System Black