117-1002-5 - Newmar Power Newmar PI-2 Black Handset

The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and are available in either bright white or traditional black. Bulkhead mounting bracket is provided. Two versions are available:

PI-2: Designed for communication between only two points. A single call button sounds a buzzer and illuminates an indicator lamp on the companion phone. Available singly or as a set with 40' of interconnect wire, fuse, terminal lugs and mounting hardware.

PI-2 SET: Two station phone set, 40' interconnect wire, fuse, lugs, mounting hardware; 5 lbs.

PI-10:For multiple station calling capability. Up to 10 phones may be interconnected, and each phone has 10 call buttons. Sold individually-- see wiring requirements below.

Phone-Com Wiring: For PI-2, use 5 conductor wire. For PI-10, add 3 to the total number of stations to determine minimum number of conductors required.

Note: Phones are not waterproof and should be installed in a protected location

The Newmar PI-2 Black Handset is a component of the Phone-Com intercom system, designed for direct, wired, point-to-point voice communication. This unit, part number 117-1002-5, facilitates communication between two specific points. It is suitable for environments requiring a dedicated, simple intercom link, such as within a vessel or a facility where reliable internal voice contact is necessary without complex networking. Operation requires a 12 VDC power source. The handset features a high-impact plastic construction and is provided with a bulkhead mounting bracket for installation. When the receiver is lifted and the call button pressed, it activates a buzzer and indicator lamp on the connected companion phone, ensuring notification. This system is intended for installation in protected locations, as the phones are not waterproof. It addresses the need for a straightforward, two-station communication solution.