The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and are available in either bright white or traditional black. Bulkhead mounting bracket is provided. Two versions are available:
PI-2: Designed for communication between only two points. A single call button sounds a buzzer and illuminates an indicator lamp on the companion phone. Available singly or as a set with 40' of interconnect wire, fuse, terminal lugs and mounting hardware.
PI-2 SET: Two station phone set, 40' interconnect wire, fuse, lugs, mounting hardware; 5 lbs.
PI-10:For multiple station calling capability. Up to 10 phones may be interconnected, and each phone has 10 call buttons. Sold individually-- see wiring requirements below.
Phone-Com Wiring: For PI-2, use 5 conductor wire. For PI-10, add 3 to the total number of stations to determine minimum number of conductors required.
Note: Phones are not waterproof and should be installed in a protected location
The Newmar PI-2 Bright White intercom system, part number 117-1002-8, offers a direct, wired, point-to-point communication solution for environments requiring reliable voice contact between two specific locations. Operating on 12 VDC, this system is designed for straightforward installation and use. Its construction utilizes high-impact plastic, available in a bright white finish, suitable for integration into various interiors. A bulkhead mounting bracket is included for secure installation. This PI-2 model is specifically configured for two-point communication, where lifting the receiver and pressing a single call button activates a buzzer and illuminates an indicator lamp on the connected companion phone. It addresses the need for dedicated, private communication without reliance on external networks, making it appropriate for vessels or facilities where robust, localized intercom functionality is essential.
This specific listing is for the PI-2 unit only. While a PI-2 SET is available that includes two stations, 40' interconnect wire, fuse, lugs, and mounting hardware, this individual PI-2 unit comes with a bulkhead mounting bracket.
The Newmar PI-2 intercom system operates on 12 VDC power.
No, the phones are not waterproof and should be installed in a protected location to prevent damage.
The PI-2 system requires 5-conductor wire for interconnection between the two points.
117-1002-8 - Newmar Power Newmar PI-2 Bright White Bright White