DPE-SP110I - D-link Accessory DPE-SP110I Ethernet Lightning Protector Indoor Retail

Technical Specifications
Interfaces
Line In Port (Line IN)
1 x RJ45 port (power + data in)
Compatible with 10/100/1000Base-T
PoE Passthrough
Line Out Port (Device)
1 x RJ45 port (power + data out)
Compatible with 10/100/1000Base-T
PoE Passthrough
Performance
Maximum Discharge Current
10 kA
Common Mode (Line-to-Ground) Protection
20 kV (10/700 us)
10 kA (8/20 us)
Differential Mode (Line-to-Line) Protection
6 kV (10/700 us)
1 kA (8/20 us)
Clamping Voltage (Line-to-Ground)
600 V at 10 kA
Clamping Voltage (Line-to-Line)
20 V at 1 kA
Surge Protection Response Time
5 ns
Ethernet PoE/Data Line
Protects 10/100/1000 Mbps Ethernet ports
Protects all RJ45 8-pin assignments
Protects all four pairs of all types of Ethernet cables including Cat 5, Cat 5E, and Cat 6
PoE Passthrough
Supports IEEE 802.3af/at
Supports up to 60 W PoE Passthrough
Diagnostic LEDs
Service Life (per device)
OFF - normal
ON - Device has reached its service life and needs to be replaced
Note: The indicator only works with PoE equipment. The indicator works based on the characteristics of the snubber components. Snubber components absorb surge energy by consuming its chemical contents that will gradually degrade its resistance. The resistance degradation can be tested by applying a DC voltage, indicating its service life.
Physical
Maximum PoE Operation DC Voltage
60 V DC
Maximum PoE Operation DC Current
1 A
Operation Temperature
-40 to 85^oC (-40 to 185^oF)
Storage Temperature
-40 to 85^oC (-40 to 185^oF)
Humidity
0 to 95%, non-condensing
Material
Aluminium
Ground Cable
AWG12
Mean Time Between Failure (MTBF)
923,617 hours
Certifications
CE
IEC 61643-21 (10 kA)
IEC 61000-4-5
ITU-T K-Series
RoHS 6