Product Overview
D-Links DGS-712 1000BASE-T Copper Small Form Pluggable (SFP) transceiver is based on the SFP Multi Source Agreement. It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab. The DGS-712 plugs into any standard SFP interface allowing for 1000Base-T Gigabit transmission over standard Category 5 twisted pair copper.
Technical Specifications
- Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink - Hot Pluggable - Compatible with All Standard 1000Base-T Twisted Pair Copper Cabling - Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712 Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet Transceiver Type: SFP (Small Form Pluggable) Connector: RJ-45 Auto MDI/MDIX: Automatic crossover detection enabled; External crossover cable not required Data Rate: 1,000 Mbps (IEEE 802.3 compatible); 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only Cable Type: Cat. 5 twisted-pair cable Maximum Cable Distance Coverage: 100 meters Supply Current: 350mA (typical), 400mA (maximum), 1.3W max power over full range of voltage and temperature Input Voltage: 3.1V (minimum), 3.3V (typical), 3.5V (maximum), Referenced to GND Surge Current: 30mA; Hot plug above steady state current Operating Temperature: 32° to 185° F (0° to 85° C) Storage Temperature: -40° to 185° F (-40° to 85° C) Waranty: 2 Years
