The DGS-1100-05PD is a unique 5-port switch powered through the network cable by an upstream PoE power source (PoE switch or injector). As a "PoE extender", it also has the ability to propagate (pass-through) PoE power further downstream to one or two Powered Devices (PDs). Powered by PoE The DGS-1100-05PD is powered by a PoE switch or PoE injector that can be located up to 100m away. As such, this device is intended for applications where a small 5-port Gigabit switch is required but AC power is not close by. The upstream PoE source may support either 802.3af or 802.3at. One switch port is used for the power input (port 5) and the other four ports are available as standard 10/100/1000 ports for networked devices, such as PCs, printers, etc. PoE Extender The DGS-1100-05PD switch can also "pass-through" PoE power to one or two downstream PDs (such as IP Cameras, IP Phones, Wireless APs). The PoE budget for this feature is dependent on the PoE source (802.3af or 802.3at) and the PD's PoE Classification. PoE pass-through capability makes the DGS-1100-05PD ideal for IP Surveillance networks when cameras are located beyond 100m from the main PoE switch. As an additional benefit, because the switch is smart-managed, an administrator can control various PoE functions through the user interface, such as remotely rebooting cameras or access points, from anywhere on the network.
Technical Specifications
Physical Various selection of port counts, with or without PoE and fibre support Fanless design for silent operation (except for DGS-1100-10MP/10MPP/24P/26MP) Green Technology Link Status detection IEEE 802.3az compliant Time-based PoE (PoE models excluding DGS-1100-08P) Advanced Features Bandwidth Control IEEE 802.1Q VLAN traffic segregation Port-based VLAN IEEE 802.1p QoS Surveillance VLAN Voice VLAN Management Features Client-based utility or web-based GUI Built-in SNMP MIB Video Surveillance Mode (MP/MPP Models) Surveillance optimised web interface High PoE budget and PoE+ ports Per-port 6 kV surge protection ONVIF support Number of 10/100/1000BASE-TX ports 5 ports PoE Supported Models (Standard(s)/Number of Ports/Maximum Power Budget) 802.3af/2 ports/18 W with 802.3at / 8 W with 802.3af input power Switch Capacity 10 Gbps Maximum Forwarding Rate 7.44 Mpps MAC Address Table Size 2K Packet Buffer 1 Mbits Flash Memory 2 Mbytes Diagnostic LED Indicators Power (Per Device) : Yes Link/Activity/Speed (Per Port) : Yes Power Consumption (Maximum) 23.92W (PoE on) Ventilation fanless Heat Dissipation N/A MTBF 2,346,941 hours Temperature operating: 0o to 40oC (32o to 104oF), storage: -10o to 70oC (14o to 158oF ) Humidity operating: 0% - 90% Non-condensing EMI/EMC FCC Class B, CE Class B, VCCI Class B, BSMI, CCC