SMART3000RM2UN - Eaton Tripplite Tripp Lite, UPS, SmartPro 3000VA, 120V, 2880W, 2U, AVR, 8 x L5-20R, 1 x L5-30R, USB, SN

This SmartPro(R) Line-Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line-Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. This unique configuration excels in exceptionally poor power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98-percent line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card.The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and macOS. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available for free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rack-mount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

• UPC Code: 037332177902
• UPS Type: Line-Interactive
• Input Phase: Single-Phase
• Rated input current (Maximum Load): 24A
• Nominal Input Voltage(s) Supported: 120V AC
• UPS Input Connection Type: L5-30P
• UPS Input Cord Length (ft.): 10
• Recommended Electrical Service: 30A 120V
• Output Capacity (VA): 3000
• Output Capacity (kVA): 3
• Output Capacity (Watts): 2250
• Output Capacity (kW): 2.25
• Power Factor: 0.75
• Nominal Voltage Details: 120v nominal output in battery mode
• Frequency Compatibility: 60 Hz
• Output Voltage Regulation (Line Mode): -14%, +6%
• Output Voltage Regulation (Battery Mode): +/- 5%
• Load Management Receptacles: Two switchable single-outlet load banks
• Output Circuit Breakers: Two 20A output breakers protect 4 5-15/20R outlets each
• Output AC Waveform (AC Mode): Pure Sine wave
• Output AC Waveform (Battery Mode): Pure Sine wave
• Nominal Output Voltage(s) Supported: 110V; 115V; 120V
• Output Receptacles: (8) 5-15/20R; (1) L5-30R
• Individually Controllable Load Banks: Yes
• Battery Type: Valve Regulated Lead Acid (VRLA)
• Runtime Full Load (min.): 3.5 min. (2250W)
• Runtime Half Load (min.): 10 min. (1125W)
• Expandable Runtime: Yes
• Expandable Runtime Description: Output with external battery pack configurations is limited to 1600 watts maximum
• External Battery Pack Compatibility: BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)
• DC System Voltage (VDC): 48
• Battery Recharge Rate (Included Batteries): Less than 4.5 hours from 10% to 90%
• Battery Access: Front panel battery access door
• Internal UPS Replacement Battery Cartridge: RBC94-2U
• Battery Replacement Description: Hot-swappable, user replaceable batteries
• Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
• Overvoltage Correction: Input voltages between 127 and 145 are reduced by 12%
• Undervoltage Correction: Input voltages between 108 and 96 are boosted by 12%
• Severe Undervoltage Correction: Input voltages between 83 and 95 are boosted by 24%
• Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
• Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset
• Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
• Audible Alarm: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
• LED Indicators: Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).
• UPS AC Suppression Joule Rating: 570
• UPS AC Suppression Response Time: Instantaneous
• EMI / RFI AC Noise Suppression: Yes
• Primary Form Factor: Rackmount
• Rack Height: 2U
• Cooling Method: Fan
• Included Mounting Accessory Description: Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
• Installation Form Factors Supported with Included Accessories: 4 post 19 inch rackmount
• Installation Form Factors Supported with Optional Accessories: 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )
• Minimum Required Rack Depth (inches): 23
• Minimum Required Rack Depth with External Battery Pack (cm): 67
• Minimum Required Rack Depth with External Battery Pack (in.): 26.5
• Minimum Required Rack Depth without External Battery Pack (cm): 62
• Minimum Required Rack Depth without External Battery Pack (in.): 24.5
• Optional Mounting Accessory Notes: Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
• Primary UPS Depth (mm): 494
• Primary UPS Height (mm): 87
• Primary UPS Width (mm): 440
• Shipping Dimensions (hwd / in.): 8.80 x 23.90 x 22.20
• Shipping Weight (lbs.): 79.28
• UPS Housing Material: Steel
• UPS Power Module Dimensions (hwd, in.): 3.43 x 17.32 x 19.46
• UPS Power Module Weight (kg): 28.49
• UPS Power Module Weight (lbs.): 62.8
• Unit Dimensions (hwd / in.): 3.430 x 17.320 x 19.460
• Unit Weight (lbs.): 62.800
• Operating Temperature Range: 32? to 104?F (0? to 40?C)
• Storage Temperature Range: 5? to 122?F (-15? to 50?C)
• Relative Humidity: 0 to 95%, non-condensing
• AC Mode BTU / Hr. (

The Eaton Tripplite SMART3000RM2UN is a SmartPro Line-Interactive Uninterruptible Power Supply (UPS) designed for network-grade power protection of critical server, network, and telecommunications equipment. This 2U rack/tower unit provides 3000VA/2250W capacity and features Automatic Voltage Regulation (AVR) to correct brownouts and overvoltages, ensuring stable power delivery without relying on battery power. It includes eight L5-20R and one L5-30R output receptacles. The UPS is equipped with a pre-installed WEBCARDLX network management interface for remote monitoring and control via web browser, SNMP, telnet, or SSH, supporting 10/100 Mbps Ethernet. Additional communication options include USB and DB9 serial ports, compatible with Windows and macOS power management features. This unit is suitable for IT environments requiring reliable power backup and active voltage conditioning, particularly in locations with fluctuating utility power, to prevent downtime and data loss.