Maretron PT-0-5000PSI-01 0-5000 PSI Pressure Transducer with NMEA 2000 Connection

Maretron 0-5000 PSI Pressure Transducer

This robust pressure transducer is specifically designed to seamlessly integrate into the NMEA 2000® network through the Maretron FPM100 Fluid Pressure Module.

Technical Specifications:

• Pressure Range: 0 to 5000 PSI (344.74 bar)
• Accuracy: ± 0.5% Full Scale
• Type: Absolute (no vent tube)

Installation Guide:

Each Maretron pressure transducer features a 1/4 in. NPT male threaded fitting. For proper installation, connect the pressure transducer to a 1/4 in. NPT female fitting on the system or tank being monitored, applying a maximum torque of 150 in-lbs (16.95 Nm).

In scenarios where pressure spikes or transients may occur, or when the measured pressure might exceed the pressure transducer's maximum rating, it is advisable to first install a Pressure Snubber (PT-SNUB-01) to the monitored system before connecting the pressure transducer to the female port on the snubber.