PGC-1236X - Proguide Batteries Pro-Guide 2 Bank On-Board Battery Charger - (1) 12V / (1) 36V - 30-Amp

2 Bank On-Board Battery Charger - (1) 12V / (1) 36V - 30-Amp

The Pro-Guide PGC-1236x is a 12V Lead Acid / AGM / Lithium & 36V Lithium on-board battery charger.

Each 12V Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.

Allowing the charger to supply a single 12V Charging Bank for Lead Acid, AGM, or Lithium Chemistries, and then a second bank to charge a 36V Lithium Battery(s).

Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.

The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.

With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.

Protection:

• Output Over-Voltage
• Output Over Current
• Output Short Circuit
• Output Reverse Polarity
• Over Temperature

Input:

• Input Voltage: AC 110-120V
• Frequency: 60Hz
• Input Current: <6A

Specifications:

• Battery Type: 12V Lead Acid/AGM/Lithium & 36V Lithium
• Output Voltage: DC 12V x 1 & DC 36V x 1
• Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery & 43-44 for 36V Lithium Battery 
• Output Current: 20A for 12V Bank & 10A for 36V Bank
• Length: 13.15"
• Width: 9.96"
• Height: 3.86"
• Weight: 24.3 lbs
• IP Rating: 68

The ProGuide PGC-1236X is a 2-bank on-board battery charger designed for specific power configurations. It provides one 12V charging bank and one 36V charging bank, with a total output of 30 amps. The 12V bank supports Lead Acid, AGM, and Lithium battery chemistries, offering three selectable charge profiles. The 36V bank is specifically for Lithium batteries. This charger is suitable for IT environments or applications requiring simultaneous charging of a 12V battery (of various types) and a 36V Lithium battery. Its on-board design allows for continuous connection, utilizing an Intelligent PGC Algorithm to monitor and maintain battery charge levels. The unit also features an Activation Mode to wake asleep Lithium batteries. Protection features include output over-voltage, over-current, short circuit, reverse polarity, and over-temperature. It operates on AC 110-120V at 60Hz.