29+Years
29+Years
3 Available
Condition: New
Pro-Guide PGC-110 1-Bank 12V 10A Lead acid/LiFePO4 On Board Charger, IP68
Model: PGC-110Each Bank can select one of three charge profiles and allows the consumer to mix and match for their optimum setup.
Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or Simply Hold the button for (3-5) seconds to enter a manual Activation Mode.
The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline ensuring that you’ll be fully charged for your next adventure.
With over 40 years of experience, Pro-Guide is proud to stand behind this This charger is covered by a 2 Year Free, and 4 Year Total Warranty.
Specifications| Battery Type: | Lead Acid/AGM/Lithium |
| Output Voltage: | DC 12Vx 1 |
| Max Output Voltage: | 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery |
| Output Current: | 10A x 1 |
| Length (in / mm): | 6.02in / 153mm |
| Width (in / mm): | 9.96in / 253mm |
| Height (in / mm): | 3.86in / 98mm |
| Weight (lbs / kg): | 9.5lbs / 4.3kg |
| IP Rating: | 68 |
The Pro-Guide PGC-110 is a 1-bank, 12V 10A on-board battery charger designed for IT environments requiring reliable power maintenance. This unit supports both Lead Acid/AGM and LiFePO4 battery types, offering flexibility for various system configurations. Each bank allows for the selection of one of three charge profiles, enabling users to optimize charging based on specific battery chemistry. A key feature is its ability to wake 'asleep' lithium batteries via an activation mode, which can be initiated automatically or manually. The PGC-110 is engineered for continuous connection, utilizing an intelligent algorithm to monitor and maintain battery charge levels over time. With an IP68 rating, it is suitable for demanding conditions where dust and water resistance are necessary. This charger is intended for businesses needing a durable, versatile solution for maintaining critical 12V battery systems.
The PGC-110 charger is compatible with Lead Acid, AGM, and Lithium (LiFePO4) battery types. Each bank can be configured with a specific charge profile to match the battery chemistry.
The charger provides an output current of 10A x 1 for its single bank. The output voltage is DC 12V, with a maximum output voltage ranging from 14.1-14.3V for Lead Acid, 14.3-14.7V for AGM, and 14.4-14.7V for Lithium batteries.
The IP68 rating indicates that the Pro-Guide PGC-110 charger is fully protected against dust ingress and can withstand prolonged immersion in water under specified conditions. This makes it suitable for harsh or outdoor IT environments.
Yes, the PGC-110 includes an activation mode that supplies a short voltage to wake 'asleep' lithium batteries. This can be done automatically or manually by holding a button for 3-5 seconds.
PGC-110 - Proguide Batteries Pro-Guide PGC-110 1-Bank 12V 10A Lead acid/LiFePO4 On Board Charger, IP68
