29+Years
29+Years
3 Available
Condition: New
Seastar PA6010 Power Assist Autopilot Pump
Model: PA6010Converts manual hydraulic steering for dramatic reduction in steering wheel torque and at the same time provides a pump for an autopilot installation.
The SeaStar Power Assist Autopilot pump is the standard power assist product with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot pump is a fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes (type 1 & type 2).
Specifications| 12vDC | |
| Fittings | Compatible with standard SeaStar Hoses (HO51xx etc.) |
| Oil Compatibility | SeaStar Steering Fluid (MIL 5606) |
| Autopilot Pump Sizes | 60 in3/min (no load) |
| Max Pressure | 1000psi |
| Typical Current Draw (Depending on application) | 4 - 8 amps |
| Pump cylinder capacity | 4.9 in3 - 12.5 in3 |
The Seastar PA6010 Power Assist Module is designed for business and IT buyers managing marine equipment, offering a practical solution for converting manual hydraulic steering systems to power steering. This unit integrates a power assist function with an autopilot pump, streamlining installation by eliminating the need to modify the system for a separate autopilot pump. It significantly reduces steering wheel torque, enhancing operational efficiency for vessels equipped with existing SeaStar manual systems ranging from 1.4 to 2.4 SeaStar helm pumps. The module is suitable for both OEM and retrofit applications and is compatible with power purge systems. Operating on 12vDC, it features a fixed-flow, reversible internal hydraulic gear pump engineered for minimal vibration and noise. This product addresses the need for improved steering ergonomics and simplified autopilot integration in professional marine environments.
The PA6010 module includes the PA1200-3 Power Assist unit, the AP1219 Pump, and the HA1205 SPA Adapter. These components facilitate the conversion of manual hydraulic steering to power steering and provide an autopilot pump.
This module is designed as an add-on to existing SeaStar manual systems, specifically compatible with 1.4 to 2.4 SeaStar helm pumps. It also works with standard SeaStar Hoses (e.g., HO51xx) and SeaStar Steering Fluid (MIL 5606).
The Seastar PA6010 operates on 12vDC. The typical current draw ranges from 4 to 8 amps, depending on the specific application and operational demands.
The module has a maximum pressure rating of 1000psi. The autopilot pump provides a flow rate of 60 in3/min (no load).
PA6010 - Seastar Power Assist Module Consisting of PA1200-3 AP1219, and HA1205
