HyperX HX428C14SB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2800 CL14 SDRAM (Synchronous DRAM) 2Rx8, memory modules, based on sixteen 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2800 at a low latency timing of 14-16-16 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
XMP TIMING PARAMETERS• JEDEC: DDR4-2133 CL15-15-15 @1.2V
• XMP Profile #1: DDR4-2800 CL14-16-16 @1.35V
• XMP Profile #2: DDR4-2666 CL14-15-15 @1.35V
CL(IDD)
15 cycles
Row Cycle Time (tRCmin)
46.05ns(min.)
Refresh to Active/Refresh Command Time 1x mode (tRFCmin)
260ns(min.)
Row Active Time (tRASmin)
33.00ns(min.)
Maximum Operating Power
TBD
UL Rating
94 V - 0
Operating Temperature
0oC to +85oC
Storage Temperatur
-55oC to +100oC
Item Dimension (L inchxW inchxH inch)
3 x 1 x 1
Weight
1.00 lb
Warranty Information
lifetime Manufacture Warranty