29+Years
29+Years
87 Available / 1 Sold
Condition: New
The TP-Link EAP225 Omada AC1350 Gigabit Wireless Access Point is designed for business environments requiring reliable and scalable wireless connectivity. This device operates on both 2.4GHz and 5GHz frequencies, offering signal rates up to 450Mbps and 867Mbps respectively, compliant with IEEE 802.11ac/n/g/b/a standards. It features a Gigabit Ethernet port with support for IEEE 802.3af PoE and Passive PoE, simplifying installation by combining power and data over a single cable. The EAP225_V3 is suitable for organizations needing to deploy multiple SSIDs (up to 16) with VLAN mapping for network segmentation. Its capabilities include Band Steering, Load Balance, MU-MIMO, and Beamforming to optimize wireless performance and client distribution. Management is facilitated through EAP Controller Software, providing centralized control over multiple access points. Mounting kits are included for ceiling or wall installation, addressing common deployment scenarios in office or commercial settings.
HARDWARE FEATURES Interface
Gigabit Ethernet (RJ-45) Port x1 (Support IEEE802.3af PoE and Passive PoE) Button
Reset Power Supply
802.3af PoE or passive PoE Power Consumption
12.6W Antenna Type
3 Internal Omni
2.4GHz: 4dBi Mounting
Ceiling /Wall Mounting (Kits included) Physical Security Lock
Yes Hardware Watch Dog
Yes WIRELESS FEATURES Wireless Standards
IEEE 802.11ac/n/g/b/a Frequency
2.4GHz and 5GHz Signal Rate
5GHz:Up to 867Mbps
2.4GHz:Up to 450Mbps Wireless Functions
Multiple SSIDs (Up to 16 SSIDs, 8 for each band)
Enable/Disable Wireless Radio
Automatic Channel Assignment
Transmit Power Control (Adjust Transmit Power on dBm)
QoS(WMM)
Band Steering
Load Balance
MU-MIMO
Airtime Fairness
Beamforming
Rate Limit
Reboot Schedule
Wireless Schedule
Wireless Statistics based on SSID/AP/Client Wireless Security
Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support Transmission Power
less than or equal to24dBm(2.4GHz)
less than or equal to22dBm(5GHz) MANAGEMENT EAP Controller Software
Yes Email Alerts
Yes LED ON/OFF Control
Yes
The TP-Link EAP225 supports power via 802.3af PoE or passive PoE through its Gigabit Ethernet port. This allows for flexible deployment without the need for a separate power adapter if PoE infrastructure is available.
The access point comes with mounting kits for both ceiling and wall installation. This provides flexibility for integrators to deploy the unit in various indoor environments.
Yes, the EAP225 supports up to 16 SSIDs, with 8 for each frequency band. This allows for the creation of multiple isolated wireless networks, which can be mapped to specific VLANs for enhanced security and network segmentation.
The access point offers a maximum theoretical signal rate of 867Mbps on the 5GHz band and 450Mbps on the 2.4GHz band. These speeds are based on IEEE 802.11ac/n standards.
EAP225_V3 - Tplink TP-Link EAP225 - Omada AC1350 Gigabit Wireless Access Point
