29+Years
29+Years
4 Available / 2 Sold
Condition: New
Arm Mounted Pod Compact - Up to 8" Displays
Designed with the latest generation screens in mind, it is as low profile as it can get. Achieve a neat and streamlined look overall, perfect for installations where there is limited space available.
Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.
For Displays & Standard Instruments
Features:
Increased Protection
Pod seal is manufactured from a high tear strength silicone; it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.
Supplied Uncut
As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.
Universal Fitting
Fits pedestal rails from 25mm to 33.7mm (0.98” to 1.33”). Fit your display onto standard and curved rails.
Great Viewing Options
Viewing angle can be set upon installation. Cables are routed internally through the clamp and onto the rail.
The Scanstrut Camera Plate 3, part number DPT-C-PLATE-03, is an accessory designed for integrating FLIR M300 Series Thermal Cameras into dual mount systems. This component facilitates the co-location of various marine electronics, such as open array radar, satdomes, and cameras, onto a single modular installation. It addresses the challenge of limited mounting space by providing a dedicated, secure platform for thermal cameras within a consolidated system. The plate is intended for use in powerboat, RIB, or sailboat wheelhouse environments where a level mounting surface for displays and instruments is often difficult to achieve. This product is suitable for IT hardware resellers serving clients who require integrated marine navigation and surveillance solutions, ensuring compatibility with specified FLIR thermal cameras within a Scanstrut Dual Power Tower setup.
Camera Plate 3 Fits FLIR M300 Series Thermal Cameras for Dual Mount Systems
The modular Dual Power Tower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation.
Specifically for Camera plate 2 (FLIR M300 Thermal Imaging Cameras for Dual Mount Systems)
This camera plate is specifically designed to fit FLIR M300 Series Thermal Cameras for use with dual mount systems.
It is designed for modular Dual Power Tower systems, which allow for the combined mounting of radar, satdome, and cameras in a single, space-saving installation.
The plate is used to integrate FLIR M300 Series Thermal Cameras onto marine vessels, such as powerboats, RIBs, or sailboats, particularly where a consolidated mounting solution for multiple electronics is desired.
The product data does not specify if the camera plate itself is supplied pre-cut; however, other Scanpod products from the manufacturer are typically supplied uncut.
DPT-C-PLATE-03 - Scanstrut Camera Plate 3 Fits FLIR M300 Series Thermal Cameras f/Dual Mount Systems
