BOLT912ED - Bennett Trim Tabs Bennett BOLT912-ED Trim Tabs 9X12 Require Control Edge Mount

Bennett 9X12 Trim Tab System Edge Mount

Bennett Electric Trim Tab Sets without Controls

• Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
• Robust, water-tight black nylon actuator provides trouble-free operation
• Main seal located high to protect against marine growth and water intrusion failures
• Quieter than any other system on the market - No more scaring the fish away!
• Installation is fast - no need to disassemble parts of the actuator

Boaters can now enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats.

Bennett Marine invented the electric trim tab in 1960 and now Bennett leads the way with a brand new electric trim tab system designed to outperform and outlast any electric system on the market.

Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.

While Bennett strongly recommends hydraulic trim tabs for most applications, electric trim tab systems are suitable for:

• Trailered boats from 17-28 feet
• Single actuator use, due to the inability to synchronize two electric actuators on the same tab

Requires control - sold seperately

• 12-volt actuators (2) with 6ft. wire harnesses and waterproof connectors BEA3000
• Stainless steel trim planes (2) and mounting plates
• 20 Ft Wire Harness with waterproof connectors

The Bennett Marine BOLT912ED trim tab system is an electric trim tab solution designed for marine applications, specifically for trailered boats ranging from 17 to 28 feet. This system provides boaters with a mechanism to adjust their boat's running attitude, which can improve performance and fuel efficiency. It includes two 12-volt actuators with integrated 6-foot wire harnesses and waterproof connectors, along with two stainless steel trim planes and mounting plates. A 20-foot wire harness with waterproof connectors is also supplied. The design features concealed wiring through the upper hinge to protect against marine exposure and a robust, water-tight black nylon actuator for operational reliability. The main seal is positioned high to mitigate issues related to marine growth and water intrusion. This system is suitable for single actuator use per tab and requires a separate control unit for operation. It addresses common durability and water intrusion problems found in older electric trim tab designs.