1674-6 - Navico Group Attwood 90° P-Trap Fuel Tank Vent - Flush Mount - Black w/Stainless Steel Vent Head

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent Head

This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.

Features:

• This black vent with a stainless steel vent head meets ABYC standards
• Flush Mount - 5/8" I.D. hose
• (inch) 1-3/8" install. hole size
• (inch) 1" Max. hull thickness

*Compatible with Ethanol blended fuels

The Attwood 90-Degree P-Trap Fuel Tank Vent, part number 1674-6, is designed to facilitate air venting for fuel tanks while preventing water ingress. This flush-mount component is suitable for marine applications, particularly for vessels operating in conditions where water exposure, such as sea spray or washdowns, is common. It integrates a P-trap design to mitigate water entry into the fuel tank, potentially eliminating the requirement for an anti-siphon loop in the vent hose. The unit features a black body with a stainless steel vent head, ensuring durability in marine environments. It is compatible with ethanol-blended fuels, addressing a common concern for modern marine fuel systems. Installation requires a 1-3/8-inch hole and supports a maximum hull thickness of 1 inch, connecting to a 5/8-inch interior diameter hose. This vent is intended for IT and procurement professionals seeking reliable fuel system components for marine vehicle integration or maintenance.