29+Years
29+Years
44 Available
Condition: New
The APC NetShelter Switched Rack PDU, part number AP8932, is a 0U vertical rack-mountable power distribution unit designed for IT environments requiring granular power control and monitoring. This PDU is suitable for businesses operating within a 100V to 120V input voltage range, providing 24 NEMA 5-20R outlets. It connects via a NEMA L5-30P plug and has a 30A input current capacity, delivering 2880 VA. Key features include remote outlet-level power on/off functionality for equipment rebooting and power sequencing to manage startup/shutdown order. Real-time current metering helps prevent circuit overloads, with user-defined alarms for proactive issue detection. Management is accessible via secure Web, SNMP, or Telnet interfaces, and it integrates with APC Centralized Management platforms. This PDU addresses challenges related to remote power management, load shedding, and monitoring in data centers or server rooms.
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
The APC NetShelter Switched Rack PDU requires a NEMA L5-30P plug for its input connection. It operates within an input voltage range of 100V to 120V and has a 30A input current.
This PDU is equipped with 24 NEMA 5-20R outlets, designed to provide power to connected IT hardware and other devices within a rack environment.
The package includes the Rack PDU 2G, Switched, ZeroU, 30A, 100-120V, (24) 5-20R itself, an installation guide, rack mounting brackets, a safety guide, and a serial configuration cable.
The PDU supports remote management and monitoring through secure Web, SNMP, or Telnet interfaces. It also integrates with APC Centralized Management platforms such as InfraStruxure Central, Capacity Manager, and Change Manager.
AP8932 - Apc - Schneider Electric APC NetShelter Switched Rack PDU, 2G, 0U, 30A, 100V to 120V, 24 NEMA 5-20R outlets | S
