29+Years
29+Years
7 Available
Condition: New
Ble Sea Systems 285-Series Circuit Breaker - Panel Mount 80A
Model: 7086-BSS* Do not use as a switch where high inrush currents are expected
Specifications| 80A | |
| Maximum Voltage | 48V DC |
| Mounting | Surface Mount |
| Circuit Breaker Type | Thermally responsive Bi-metal blade |
| Terminal Stud Torque | 60 in-lb (6.78 Nm) |
| Interrupt Capacity | 3000A @ 48V |
| Minimum Operating Temperature | -40 deg C |
| Maximum Operating Temperature | 85 deg C |
| Circuit Breaker Class | Type III - switchable/manual reset - trip free |
| Terminal Stud | M6 (accepts 1/4 in Ring Terminal) |
The Navico Group Blue Sea 285-Series 80 Amp Circuit Breaker, part number 7086-BSS, is a panel-mount circuit protection device designed for DC electrical systems. This unit serves as a direct replacement for 185-Series circuit breakers and integrates both switching and circuit breaker functionalities. It is suitable for applications requiring an 80A thermal circuit breaker with manual reset capabilities, operating up to 48V DC. Key features include a visible reset lever indicating an open condition and ignition protection, meeting SAE J1171 external ignition protection requirements, which makes it safe for use in gasoline-powered boat environments. The device is also weather-resistant and features a "Trip Free" design, preventing it from being held closed after a trip. It is important to note that this breaker should not be used as a switch in applications with high inrush currents. It is designed for surface mounting and operates across a wide temperature range from -40�C to 85�C.
This circuit breaker is rated for a maximum voltage of 48V DC and has an amperage capacity of 80A.
Yes, it is ignition protected and meets SAE J1171 external ignition protection requirements, making it safe for installation aboard gasoline-powered boats. It is also weather resistant.
This is a Type III, thermally responsive bi-metal blade circuit breaker, which is switchable with a manual reset. It features a "Trip Free" design, meaning it cannot be held closed after tripping.
The circuit breaker utilizes M6 terminal studs, which are designed to accept 1/4 inch ring terminals. The recommended terminal stud torque is 60 in-lb (6.78 Nm).
7086-BSS - Navico Group Blue Sea 285-Series 80 Amp Circuit Breaker Panel Mount
