29+Years
29+Years
6 Available
Condition: New
Blue Sea Systems m-Series Selector 3 Position Battery Switch - Black
Model: 6008200-BSSSwitches a single battery to a single load group.
Specifications| Selector 3 Position | |
| Color | Red |
| Switch Positions | 3 |
| Battery Combine | No |
| Alternator Field Disconnect | No |
| Maximum Voltage | 32vDC |
| Stud Size | 3/8 in |
| Terminal Stud Torque | 120 in-lb (13.56 Nm) |
| Continuous Rating | 300A |
| Intermittent Rating | 500A (5 min) |
| Cranking Rating 30 sec | 900A |
| Battery Inputs | 2 |
| Cable Clearance For 4/0 AWG Cables | 1.12in (28.45 mm) |
| Cable Size to Meet Ratings | 4/0 AWG (120mm2) |
| Mounting Holes | Accept #10 Screw |
| Stud Material | Tinned Copper |
| Stud Torque | 120 in-lb (13.56 Nm) |
| Terminal Stud Size | 3/8 in - 16 (M10) |
The Navico Group Blue Sea M-Series Battery Switch, part number 6008200-BSS, is a selector switch designed for managing power distribution from two battery inputs to a single load group. This unit is suitable for IT environments requiring reliable power isolation and switching, particularly in applications where DC power management is critical. It features tin-plated copper studs for enhanced conductivity and corrosion resistance, accepting 3/8 inch (M10) ring terminals. The one-piece terminal stud design aims to prevent loosening over time, contributing to system stability. With a continuous rating of 300A and an intermittent rating of 500A (5 min) at a maximum voltage of 32vDC, this switch provides robust power handling capabilities. Its IP66 rating indicates resistance to powerful water jets, and it is ignition protected, making it suitable for various demanding installations. The case design supports both surface and rear panel mounting, offering installation flexibility for IT infrastructure and related equipment.
This selector switch is designed to manage power from two separate battery inputs and direct it to a single load group. It allows for switching between batteries or turning the power off.
The switch has a continuous rating of 300A and an intermittent rating of 500A for 5 minutes. It supports a maximum voltage of 32vDC and is designed for 4/0 AWG cables to meet its ratings.
The switch features tin-plated copper studs that accept 3/8 inch (M10) ring terminals. The stud length of 7/8 inch (22mm) is designed to accommodate multiple cable terminals.
Yes, the switch is rated IP66, indicating it is protected against powerful water jets. It is also ignition protected, making it safe for installation in environments where gasoline fumes may be present.
6008200-BSS - Navico Group Blue Sea M-Series Battery Switch On/Off/On with Knob Black
