VK-K-1900812LIPEWP - Viking Electronics K-1900-812L-IP with EWP

- Vandal Resistant Features:
- 12 gauge (0.105" thick) 316 stainless steel faceplate
- Permanent laser etched graphics
- Heavy duty metal hook switch
- Heavy duty metal keypad
- Armored cable with internal stainless steel lanyard
- T-10 Security Torx drive mounting screws
- Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel Torx security screws
- Internally sealed keypad
- Equipped with Enhanced Weather Protection (EWP)
- Faceplate gasket (on EWP models)
- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with sealed push button volume control
- Two sets of SPDT 2 Amp relay contacts for door/gate or camera control---
- Optional RC-4A for Secure Remote Relay Control, see DOD 582
- SIP compliant
- PoE powered (class 1, <4 Watts)---
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- 12" armored handset cable with internal stainless steel lanyard for added strength
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
- Programmable to speed dial up to 250 numbers
- 26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228
- 26 Bit Wiegand output connect to card reader input of an Access Control System
- Cycles to rollover phone number on busy or no-answer
- Program up to 1,000 keyless entry codes--- and/or proximity card numbers
- Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
- Event logging with time and date stamp
- Remotely programmable
- Extended temperature range (-40?F to 140?F)
- Zinc plated steel rough-in box included
- Flush mount with included steel rough-in box, or use an optional VE-5x10 surface mount box (not included, see DOD 424)
- Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
- Diagnostics (for testing relay)