VK-K-1270-IP-EWP - Viking Electronics K-1270-IP with Enhanced Weather Protecti

EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD# 582
Blue "Call /Status" LED indicator
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
Viking's proprietary VOX switching eliminates the need for "Push to Talk" mode
Network downloadable firmware
Programmable to speed dial up to 12 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40?F to 140?F)
Programmable volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box included