Qnap TS1683XURPE212416GUS TS-1683XU-RP-E2124-16G-US Intel Xeon E-2124 3.3GHz/ 16GB DDR4/ 6GbE/ 16SATA/ USB3.1/ 16-Bay 3U

Specifications

• Mfr Part Number: TS-1683XU-RP-E2124-16G-US
  
• Hardware:
  • CPU: Intel Xeon E-2124 Processor (3.3GHz, Burst Up to 4.3GHz, quad-core)
    
  • CPU Architecture: 64-bit x86
    
  • Floating Point Unit
    
  • Encryption Engine: AES-NI
    
  • System Memory: 16GB (2x 8GB) UDIMM DDR4 ECC
  • Maximum Memory: 64GB (4x 16GB)
    
  • Memory Slots: 4x DDR4 long DIMM
    
  • Flash Memory: 4GB (Dual boot OS protection)
  • Drive Bay: 16x 3.5-inch
  • Drive Compatibility: 3.5-inch bays - 3.5-inch SATA hard disk drives, 2.5-inch SATA hard disk drives, 2.5-inch SATA solid state drives
    
  • Hot-swappable
    
  • SSD Cache Acceleration Support
    
  • LAN Port: 4x RJ45 LAN Ports, 2x 10GbE SFP+ SmartNIC port
    
  • Jumbo Frame
  • PCIe Slot: 4 slots. Slot 1: PCIe Gen2 x4 (PCH), Slot 2: PCIe Gen3 x8 (CPU), Slot 3: PCIe Gen3 x4 (CPU), Slot 4: PCIe Gen3 x4 (CPU)
  • USB: 2x Type-C USB 3.1 Gen2 5V/3A 10Gbps, 4x Type-A USB 3.1 Gen2 5V/1A 10Gbps
    
  • LED Indicators: HDD 1-16, Status, LAN, storage expansion port status
    
  • Buttons: Power, Reset
    
  • Sound Level: 53 db(A)
    
  • System Warning: Buzzer
    
  • Operating System: QTS 4.3.5 (embedded Linux)
• Network & Virtual Switch:
  • TCP/IP - Dual Stack (IPv4 & IPv6)
    
  • Jumbo frame
    
  • Port trunking (Link aggregation)
    • failover
    • Load balancing
  • DHCP server and client
    
  • RADVD
    
  • USB Wi-Fi adapter
  • Virtual switch
    • Network Address Translation (NAT)
    • Spanning Tree Protocol (STP)
    • Software-Defined Switch mode
  • Static Route
  • NCSI (Network Connectivity Status Indicator)
    
  • DDNS settings (Customize & Multiple Service )
• Security:
  • Network access protection with auto-blocking (SSH, Telnet, HTTP(S), FTP, CIFS/SMB, and AFP)
  • Host access control for shared folders (CIFS/SMB)
  • AES 256-bit folder-based and volume-based encryptions which are validated by FIPS 140-2 CAVP (Cryptographic Algorithm Validation Program)
  • 256-bit external drive encryption (AES)
  • Importing of SSL certificates from Let’s Encrypt
  • Instant alerts through email, SMS, push service, audio
  • 2-step verification
• Storage Management:
  • Supported RAID types: RAID 0, 1, 5, 6, 10, 50, 60, JBOD, Single
  • RAID Hot Spare and Global Hot Spare
  • RAID Rebuild Speed Customization
  • Online RAID capacity expansion 
  • Online RAID level migration
  • SSD RAID Over-provisioning
  • SSD RAID Performance evaluation (with SSD Profiling Tool)
  • Bitmap support
  • Disk auto S.M.A.R.T. data migration
  • Disk bad block scan and S.M.A.R.T test.
  • Disk bad block recovery
  • Disk secure data erase
  • Ironwolf Health Management
  • Storage pools
  • Qtier Data Tiering Technology
    • Automatic or scheduled data tiering
      
    • IO-aware auto tiering
    • Shared folder tiering on demand
  • Flexible volumes and LUNs with thin provisioning and space reclaiming
  • Online volume expansion
  • Volume type convert
  • Volume shrink
  • Storage space utilization
  • Snapshots
    • Volume and LUN snapshots
    • Snapshot Dashboard
    • Snapshot Manager
    • Snapshot local restore and revert
    • Snapshot Clone
    • Snapshot Replica and Snapshot Vault 
    • Snapshot remote restore and revert
    • Unified Snapshot Directory
    • Support for Windows Previous Versions (CIFS/SMB)
    • Snapshot Agent for Microsoft Windows and VMware vSphere
  • Storage expansion using QNAP expansion units
  • JBOD enclosure roaming
  • SSD read-only and read-write cache
  • SSD write-only cache
• File System:
  • Internal HDD: EXT4
    
  • External HDD: EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT
    
• Form Factor: 3U Rackmount
  
• Fan: System: 4x 9.2cm fan (12V DC)
  
• Power Supply: 2x 500W, 100-240V
  
• Power Consumption: Operating Mode, Typical - 130.43 W
  
• Dimensions (WxDxH): 18.94 x 22.58 x 5.12 inch
  
• Weight: 30.34 lbs