QNAP TS-332X SAN/NAS Storage System - Annapurna Labs Alpine AL-324 Quad-core (4 Core) 1.70 GHz - 3 x HDD Supported - 3 x SSD Supported - 2 GB RAM DDR4 SDRAM - Serial ATA/600 Controller - RAID Supported 0, 1, 5, Hot Spare, JBOD - 3 x Total Bays - 3 x 2.5"/3.5" Bay - 1 x Total Slot(s) - 10 Gigabit Ethernet - 3 USB Port(s) - 3 USB 3.0 Port(s) - Network (RJ-45) - QTS 4.3.4 - DNS, Telnet, DLNA, IPv6, FTPS, FTP, WEBDAV, SSL/TLS, AFP, CIFS, HTTPS, ... - 512 MB Flash Memory Capacity - Tower
Technical Specifications
CPU AnnapurnaLabs, an Amazon company Alpine AL-324 Quad-core 1.7GHz ARM Cortex-A57 Processor, 64-bit Encryption Acceleration Yes System Memory 2 GB DDR4 2400 (1 x 2 GB) Maximum Memory 16 GB (1 x 16 GB) Memory Slot 1 x SODIMM slot Flash Memory 512 MB NAND Flash Drive Bay Hot-swappable 3 x 3.5"/2.5" SATA 6Gb/s HDD/SSDs (2.5" tray base for installing 2.5" HDD/SSD can be purchased from QNAP Online Shop) M.2 SSD Slot 3 x M.2 2280 SATA 6 Gbps SSD Note: 1. The M.2 SSD is not included as standard. 2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD. 10 Gigabit Ethernet Port 1 x 10GbE SFP+ Gigabit Ethernet Port 2 x Gigabit RJ45 USB Port USB 3.0 (Front: 1, Rear: 2) Audio 1 x Built-in speaker 1 x 3.5mm line out jack Note: You cannot use the speakers and the line-out jack simultaneously. LED Indicators Status/Power, LAN, USB, HDD 1-3, M.2 SSD 1-3 Buttons Power, Reset, USB One-touch-copy System Warning Buzzer or Smart voice prompt Form Factor Tower Power Consumption (W) HDD standby: 18.56 W In operation: 26.22 W (with 3 x HDDs and 3 x M.2 SSDs) HDD:WD10EFRX M.2 SSD: RBU-SNS8152S3256GG2 256G Sound Level Sound pressure (LpAm): 20.4 dB(A) Operating Temperature and Relative Humidity 0 - 40oC (32oF - 104oF) 5-95% RH non-condensing, wet bulb: 27oC (80.6oF) Security Slot Kensington security slot