QNAP TS-1886XU-RP - NAS server - 18 bays - rack-mountable - SATA 6Gb/s - RAID 0, 1, 5, 6, 10, 50, JBOD, 60 - RAM 4 GB - Gigabit Ethernet / 10Gbps SFP+ - iSCSI support - 2U
Technical Specifications
CPU Intel Xeon D-1602 dual-core 2.50 GHz processor (burst up to 3.2 GHz) CPU Architecture 64-bit x86 System Memory 4 GB UDIMM DDR4 ECC (1 x 4GB) Maximum Memory 128 GB (4 x 32 GB) Memory Slot 4 x Long-DIMM DDR4 Flash Memory 5GB (Dual boot OS protection) Drive Bay Front: 12 x 3.5-inch SATA 6Gb/s, 3Gb/s Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s Drive Compatibility 3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives 2.5-inch bays: 2.5-inch SATA solid state drives Hot-swappable Yes SSD Cache Acceleration Support Yes Gigabit Ethernet Port (RJ45) 4 10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC port Pre-installed with a 10GbE PCIe adapter PCIe Slot 4 Slot 1: PCIe Gen 3 x4 Slot 2: PCIe Gen 3 x8 or x4 Slot 3: PCIe Gen 3 x4 Slot 4: PCIe Gen 3 x8 or x4 Slot 4 is preinstalled with a 10GbE network adapter. Slot 2 provides the width of PCIe Gen 3 x8 when Slot 1 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 1 is in use. Slot 4 provides the width of PCIe Gen 3 x8 when Slot 3 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 3 is in use. USB 3.2 Gen 1 port 2 Form Factor Rackmount LED Indicators HDD, SSD, Status, LAN, storage expansion port status Buttons Power, Reset Operating temperature 0 - 40 oC (32oF - 104oF) Relative Humidity 5-95% RH non-condensing, wet bulb: 27oC (80.6oF) Power Supply Unit 550W(x2), 100-240V