SYS-2029U-TN24R4T - Supermicro SY SYS-2029U-TN24R4T Intel Xeon S3647 Socket P C621 Max6TB 1600W
Technical Specifications
Motherboard Super X11DPU Processor/Cache CPU Dual Socket P (LGA 3647) 2nd Gen Intel Xeon Scalable Processors and Intel Xeon Scalable Processors, Dual UPI up to 10.4GT/s Support CPU TDP 70-205W Cores Up to 28 Cores Note BIOS version 3.2 or above is required to support 2nd Gen Intel Xeon Scalable processors (codenamed Cascade Lake-R) System Memory Memory Capacity 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel Optane DCPMM Memory Type 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM 2666 ECC DDR4 NVDIMM Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info. On-Board Devices Chipset Intel C621 chipset Storage SATA3 (6Gbps) RAID 0, 1, 5, 10 per node Network Connectivity 4x 10GBase-T ports via Intel X550 Ethernet Controller 1x Realtek RTL8211E PHY (dedicated IPMI) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Graphics ASPEED AST2500 BMC Input / Output NVMe 24 NVMe ports LAN 4 10GBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port USB 3 USB 3.0 ports (2 rear, 1 Type A) Video 2 VGA ports (1 rear, 1 onboard) Serial Port / Header 1 Serial port DOM 2 SuperDOM (Disk on Module) ports System BIOS BIOS Type AMI 32Mb SPI Flash ROM Management Software Intel Node Manager Redfish API IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor 5 Power Configurations ACPI Power Management PC Health Monitoring CPU Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator FAN Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment Thermal Control for fan connectors Chassis Form Factor 2U Rackmount Model CSE-219UBTS-R1K62P-TN24 Available Colors Black Front Panel Buttons Power On/Off button System Reset button LEDs Power status LED HDD activity LED Network activity LEDs System information (overheat/UID) LED Expansion Slots PCI-Express 2 PCI-E 3.0 x16 (FH, 10.5" L) 1 PCI-E 3.0 x8 (LP) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) Drive Bays / Storage Hot-swap 24 Hot-swap 2.5" drive bays: 24 NVMe (4 hybrid ports - SAS3 via opt. AOC) 2 rear Hot-swap 2.5" SATA drive bays M.2 1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional parts 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2 System Cooling Fans 4 Heavy duty 8cm PWM fans Power Supply 1600W Redundant Power Supplies with PMBus Total Output Power 1600W/1000W Dimension (W x H x L) 73.5 x 40 x 203 mm Input 100-127Vac / 13 - 9A / 50-60Hz 200-240Vac / 10 - 8A / 50-60Hz +12V Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac) 12Vsb Max: 2.1A / Min: 0A Output Type 25 Pairs Gold Finger Connector Certification Titanium Level Operating Environment RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10oC - 35oC (50oF - 95oF) Non-operating Temperature: -40oC to 70oC (-40oF to 158oF) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) Item Dimension (L"xW"xH") 28 x 18 x 4