SYS-2028TP-DC0TR - Supermicro SuperServer 2028TP-DC0TR

Motherboard (Two per System)
Super X10DRT-PT
Processor/Cache (per Node)
CPU
Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to 22 Cores / Up to 55MB Cache
System Bus
QPI up to 9.6 GT/s
Note
BIOS version 2.0 or above is required
System Memory (per Node)
Memory Capacity
16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
On-Board Devices (per Node)
Chipset
Intel C612 chipset
SAS
Broadcom 3008 SAS3 (12Gbps) controller, RAID 0, 1, 10 support
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics
ASPEED AST2400 BMC
Input / Output (per Node)
SAS
8 SAS3 (12Gbps) ports
LAN
2 RJ45 10GBase-T ports
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 3.0 ports (rear)
VGA
1 VGA port
Serial Port / Header
1 Fast UART 16550 port / 1 Header (internal)
Others
1 mSATA (full size) and one SATADOM support on the daughter card
1 SATADOM support on the motherboard
Chassis
Form Factor
2U Rackmount
Model
CSE-217HD+-R1K28B
Available Colors
Black
Front Panel
Buttons
Power On/Off button
UID button
LEDs
Power status LED
HDD activity LED
2 Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express
1 PCI-E 3.0 x16 slot
1 PCI-E 3.0 x8 slot
0 Slot
1 "0 slot"
(Both CPUs need to be installed for full access to PCI-E slots and 0 slot.)
Drive Bays (per Node)
Hot-swap
12 Hot-swap 2.5" SAS (8) / SATA (4) HDD Bays
System Cooling
Fans
4 heavy duty 8cm PWM fans with optimal fan speed control
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
1000W Output at 100-140V, 8-12A, 50-60Hz
1280W Output at 180-240V, 6-8A, 50-60Hz
DC Output
1000W: +12V/83A +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
Platinum Certified
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Weight
85.00 LB
Warranty Information
1 Year