SSG-6038R-E1CR16H(3YR) - Supermicro System SSG-6038R-E1CR16H(3YR) 3U Rackmount E5-2600v3 LGA2011 DDR4 C612 SATA 920W Ret
Technical Specifications
Processor/Cache CPU Intel Xeon processor E5-2600 v4(BIOS version 2.0 or above is required)/ v3 family (up to 145W TDP) Dual Socket R3 (LGA 2011) Cores / Cache : Up to 22 Cores (BIOS version 2.0 or above is required) / Up to 55MB(BIOS version 2.0 or above is required) Cache System Bus : QPI up to 9.6 GT/s System Memory Memory Capacity : 16x 288-pin DDR4 DIMM slots, Up to 2TB ECC 3DS LRDIMM, 512 ECC RDIMM Memory Type : 2400(BIOS version 2.0 or above is required) /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes : RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB Memory Voltage : 1.2 V Error Detection : Corrects single-bit errors On-Board Devices Chipset : Intel C612 chipset SAS : SAS3 (12Gbps) via LSI 3108 AOC HW RAID RAID 0, 1, 5, 6, 10, 50, 60 SATA : SATA3 (6Gbps) with RAID 0, 1, 5, 10 IPMI : Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers : Dual 10GBase-T LAN with Intel X540 Ethernet Controller Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics : ASPEED AST2400 BMC Input / Output LAN : 2x RJ45 10GBase-T LAN ports 1x RJ45 Dedicated IPMI LAN port USB : 2x USB 3.0 ports (rear) 2x USB 2.0 ports (rear) 1x Type A VGA : 1x VGA port Serial Port / Header : 1x Fast UART 16550 port / 1 Header Chassis Form Factor : 3U Rackmount Model : CSE-836BE1C-R920B Front Panel Buttons : Power On/Off button System Reset button LEDs : Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED Expansion Slots 1 PCI-E 3.0 x16 slot 6 PCI-E 3.0 x8 slots Slot 1 and 2 occupied by controller and JBOD Expansion Port Drive Bays Hot-swap : 16x 3.5 inch Hot-swap SAS3/SATA3 Drive Bays Optional OS Drive : 2x 2.5 inch optional rear Hot-swap 2.5 inch Drive Bays Backplane SAS3 12Gbps single expander backplane, w/ 16x SAS3 3.5" drive slots and 2x mini-SAS HD connectors for JBOD expansion System Cooling 2x 80mm hot-swap rear exhaust cooling fans Redundant cooling Power Supply with Power Distributor 920W high-efficiency (94 percent +) AC-DC Redundant power supplies with PMBus and I2C AC Input : 100-240 V, 50-60 Hz, 11-4.5 Amp DC Output : 4 Amp at +5V standby, 75 Amp at +12V BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI RoHS RoHS Compliant Environmental Spec. Operating Temperature : 10oC to 35oC (50oF to 95oF) Non-operating Temperature : -40oC to 70oC (-40oF to 158oF) Operating Relative Humidity : 8 percent to 90 percent (non-condensing) Non-operating Relative Humidity : 5 percent to 95 percent (non-condensing) Item Dimension (L inchxW inchxH inch) N/A