Tripp Lite SMX1000RT2U UPS, SmartPro 1000VA, 230V, 700W, 1U, Intl, AVR, 6 x C13 Outlets, USB, DB9, EPO
Special Order Ships in 1-2 weeks Condition: New
$691.14$933.04
AUTHORIZED
Free Shipping for this Item
Product Overview
1000VA/900W - 3.6 Minute Full Load - 6 x IEC 320-C13 - Battery/Surge-protected
Technical Specifications
OUTPUT Output Volt Amp Capacity (VA):1000 Output kVA capacity (kVA):1 Output Watt Capacity (watts):700 Output power factor:0.7 Nominal Output Voltage(s) Supported:220V 230V 240V Nominal Voltage details:230v nominal inverter output voltage Frequency compatibility:50 / 60 Hz Output voltage regulation (line mode):-17%, +8% Output voltage regulation (Battery mode):+/- 5% Built-in UPS output receptacles:6 C13 outlet(s) Included output power cables:Includes 2 C13 to C14 output power cables Built-in controllable switched load banks:Two switchable two-outlet C13 load banks Output AC waveform (AC mode):Sine wave Output AC waveform (battery mode):Pure Sine wave INPUT Rated input current (at maximum load):3.4A Nominal Input Voltage(s) Supported:230V AC UPS input connection type:C14 inlet UPS input connection description:C14 inlet accepts user-supplied AC power cord with country specific plug. Input circuit breaker:10A BATTERY Full load runtime (minutes):9 min. (700w) Half load runtime (minutes):21 min. (350w) DC system voltage (VDC):24 Battery recharge rate (included batteries):4.5 hours from 10% to 90% Replacement battery cartridge (internal UPS battery replacement):RBC92-2U Battery Access:Front panel battery access door Battery replacement description:Hot-swappable, user replaceable batteries VOLTAGE REGULATION Voltage regulation description:Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 159 to 282 Overvoltage correctionInput voltages between 245 and 282 are reduced by 12% Undervoltage correction:Input voltages between 159 and 199 are boosted by 14% LEDS ALARMS and SWITCHES LED Indicators5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status Alarms:Audible alarm indicates power-failure, overload and low-battery conditions Alarm cancel operation:Power-fail alarm can be silenced using alarm-cancel switch once silenced, alarm will re-sound to indicate low-battery status Switches:2 Switches control off/on power status and alarm-cancel/self-test operation SURGE / NOISE SUPPRESSION UPS AC suppression joule rating480 UPS AC suppression response time:Instantaneous EMI / RFI AC noise suppression:Yes
UPS housing material Steel
Cooling method Fan COMMUNICATIONS Communications interface:USB DB9 Serial EPO (emergency power off) Slot for SNMP/Web interface Network monitoring port description:Supports detailed monitoring of UPS and site power conditions PowerAlert software:Included Communications cable:USB and DB9 cabling included WatchDog compatibility:Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER Transfer time:2-4 milliseconds Low voltage transfer to battery power (setpoint):159 High voltage transfer to battery power (setpoint):282 SPECIAL FEATURES Grounding lug:Back panel grounding lug Cold Start (startup in battery mode during a power failure):Cold-start operation supported High availability UPS features:Hot swappable batteries Green and high efficiency features:Greater than 95% efficiency - GREEN UPS Individually controllable load banks CERTIFICATIONS UPS Certifications:Tested to UL1778 (USA) Tested to CE (EU) Tested to GOST (Russia) Tested to SASO (Saudi Arabia) Tested to IRAM (Argentina) Meets FCC Part 15 Category B (EMI) Item Dimension (L"xW"xH"): 9.5 x 20.25 x 23.5