SMART2200RM2U - Eaton Tripplite EATON, SMARTPRO 1950VA 1950W 120V LINE-INTERACTIVE SINE WAVE UPS - 7 OUTLETS, NETWORK CA

SmartPro(R) Line-Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line-Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. That unique configuration excels in exceptionally poor power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and slot for network management accessory card. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and macOS. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rack-mount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

• UPC Code: 037332150622
• UPS Type: Line-Interactive
• Input Phase: Single-Phase
• Rated input current (Maximum Load): 16A (120V)
• Nominal Input Voltage(s) Supported: 120V AC
• UPS Input Connection Type: 5-20P
• Input Circuit Breakers: 20A
• UPS Input Cord Length (ft.): 10
• Recommended Electrical Service: 20A 120V
• Output Capacity (VA): 2200
• Output Capacity (kVA): 2.2
• Output Capacity (Watts): 1920
• Output Capacity (kW): 1.92
• Power Factor: .87
• Nominal Voltage Details: 120v nominal output in battery mode
• Frequency Compatibility: 60 Hz
• Output Voltage Regulation (Line Mode): -14%, +6%
• Output Voltage Regulation (Battery Mode): +/- 5%
• Load Management Receptacles: Two switchable single-outlet load banks
• Output AC Waveform (AC Mode): Pure Sine wave
• Output AC Waveform (Battery Mode): Pure Sine wave
• Nominal Output Voltage(s) Supported: 110V; 115V; 120V
• Output Receptacles: (4) 5-15R; (4) 5-15/20R
• Individually Controllable Load Banks: Yes
• Battery Type: Valve Regulated Lead Acid (VRLA)
• Runtime Full Load (min.): 4.5 min. (1920W)
• Runtime Half Load (min.): 12 min. (960W)
• DC System Voltage (VDC): 48
• Battery Recharge Rate (Included Batteries): Less than 4.5 hours from 10% to 90% (typical, full load discharge)
• Battery Access: Front panel battery access door
• Internal UPS Replacement Battery Cartridge: RBC94-2U
• Battery Replacement Description: Hot-swappable, user replaceable batteries
• Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
• Overvoltage Correction: Input voltages between 127 and 145 are reduced by 12%
• Undervoltage Correction: Input voltages between 108 and 96 are boosted by 12%
• Severe Undervoltage Correction: Input voltages between 83 and 95 are boosted by 24%
• Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
• Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
• Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
• Audible Alarm: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
• UPS AC Suppression Joule Rating: 570
• UPS AC Suppression Response Time: Instantaneous
• EMI / RFI AC Noise Suppression: Yes
• Primary Form Factor: Rackmount
• Rack Height: 2U
• Cooling Method: Fan
• Included Mounting Accessory Description: Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
• Installation Form Factors Supported with Included Accessories: 4 post 19 inch rackmount
• Installation Form Factors Supported with Optional Accessories: 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )
• Minimum Required Rack Depth (inches): 25
• Optional Mounting Accessory Notes: Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
• Primary UPS Depth (mm): 494
• Primary UPS Height (mm): 87
• Primary UPS Width (mm): 440
• Shipping Dimensions (hwd / in.): 8.90 x 24.30 x 21.30
• Shipping Weight (lbs.): 77.80
• UPS Housing Material: Steel
• UPS Power Module Dimensions (hwd, in.): 3.43 x 17.32 x 19.46
• UPS Power Module Weight (kg): 26.13
• UPS Power Module Weight (lbs.): 57.6
• Unit Dimensions (hwd / in.): 3.430 x 17.320 x 19.460
• Unit Weight (lbs.): 57.5600
• Operating Temperature Range: 32? to 104?F (0? to 40?C)
• Storage Temperature Range: 5? to 122?F (-15? to 50?C)
• Relative Humidity: 0 to 95%, non-condensing
• AC Mode BTU / Hr. (Full Load): 306
• Battery Mode BTU / Hr. (Full Load): 1157
• AC Mode Efficiency Rating (100% Load): 96%
• Audible Noise: 45 dBA maximum, front side 1m
• Network Management Cards: SNMPWEBCARD; TLNETCARD ; WEBCARDLX ; RELAYIOCARD
• Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
• PowerAlert Software: For local monitoring via the UPS's built-in communication ports, download PowerAlert software at https://tripplite.eaton.com/products/power-alert
• Communications Cable: USB, DB9 and EPO cabling included
• WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
• Network UPS Tools (NUT) Compatibility: NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite
• Network Management Card Description: Network management card optional
• Communications Interface: DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
• Transfer Time: 5 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
• Low Voltage Transfer to Battery Power (Setpoint): 83
• High Voltage Transfer to Battery Power (Setpoint): 145
• Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
• High Availability UPS Features: Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation

The Eaton Tripplite SMART2200RM2U is a line-interactive uninterruptible power supply (UPS) designed for critical server, network, and telecommunications equipment. This 2U rack/tower unit provides 1920W (2200VA) of power protection, featuring automatic voltage regulation (AVR) to correct brownouts and overvoltages without relying on battery power. It delivers a pure sine wave output in both AC and battery modes, ensuring compatibility with sensitive electronics. The UPS includes seven outlets, with two individually controllable load banks for remote reboot or load shedding. Connectivity options include USB, RS-232, and a slot for an optional network management card. An interactive LCD interface provides real-time UPS and site power data, along with configuration options. With a 96% line-mode efficiency, it helps reduce operating costs and heat emissions. This unit is suitable for IT environments requiring stable power and protection against common power fluctuations and outages.