SMART1000RM2UL - Tripp Lite EATON, SMARTPRO UPS, LITHIUM BATTERY BACKUP - 120V, 1KVA, 800W, LINE INTERACTIVE, 2U, SINE W

UPS lithium battery backup protects equipment against damage, downtime and data loss due to blackouts, surges and line noise.

• UPC Code: 037332213099
• UPS Type: Line-Interactive
• Input Phase: Single-Phase
• Rated input current (Maximum Load): 9.2A (120V)
• Nominal Input Voltage(s) Supported: 120V AC
• UPS Input Connection Type: 5-15P
• UPS Input Cord Length (ft.): 10
• Recommended Electrical Service: 15A 120V
• Output Capacity (VA): 1000
• Output Capacity (kVA): 1
• Output Capacity (Watts): 800
• Output Capacity (kW): 0.8
• Power Factor: 0.8
• Nominal Voltage Details: 120v nominal output in battery mode
• Frequency Compatibility: 60 Hz
• Output Voltage Regulation (Battery Mode): +/- 5%
• Load Management Receptacles: Two switchable two-outlet load banks
• Output AC Waveform (AC Mode): Pure Sine wave
• Output AC Waveform (Battery Mode): Pure Sine wave
• Nominal Output Voltage(s) Supported: 110V; 115V; 120V
• Output Receptacles: (6) 5-15R
• Individually Controllable Load Banks: Yes
• Battery Type: Lithium Ion
• Runtime Full Load (min.): 8.3 min. (800W)
• Runtime Half Load (min.): 20 min. (400W)
• DC System Voltage (VDC): 24
• Battery Recharge Rate (Included Batteries): 2.7 hours from 10% to 90% (typical)
• Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
• Overvoltage Correction: Input voltages between 127 and 147 are reduced by 12%
• Undervoltage Correction: Input voltages between 83 and 107 are boosted by 12%
• Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
• Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
• Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
• Audible Alarm: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
• UPS AC Suppression Joule Rating: 570
• UPS AC Suppression Response Time: Instantaneous
• EMI / RFI AC Noise Suppression: Yes
• Primary Form Factor: Rackmount
• Rack Height: 2U
• Cooling Method: Fan
• Included Mounting Accessory Description: Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
• Installation Form Factors Supported with Included Accessories: 4 post 19 inch rackmount
• Installation Form Factors Supported with Optional Accessories: 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )
• Minimum Required Rack Depth (inches): 16
• Optional Mounting Accessory Notes: Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support
• Primary UPS Depth (mm): 318
• Primary UPS Height (mm): 89
• Primary UPS Width (mm): 441
• Shipping Dimensions (hwd / in.): 8.70 x 18.50 x 23.30
• UPS Housing Material: Steel
• UPS Power Module Dimensions (hwd, in.): 3.5 x 17.35 x 12.5
• UPS Power Module Weight (kg): 7.39
• UPS Power Module Weight (lbs.): 16.3
• Unit Weight (lbs.): 16.300
• Operating Temperature Range: 32? to 104?F (0? to 40?C)
• Storage Temperature Range: 5? to 122?F (-15? to 50?C)
• Relative Humidity: Up to 95%, non-condensing
• AC Mode BTU / Hr. (Full Load): 141
• AC Mode Efficiency Rating (100% Load): 95%
• Audible Noise: 45.5 dBA maximum, front side 1m
• COMMUNICATIONS
• Network Management Cards: WEBCARDLX ; RELAYIOCARD ; SNMPWEBCARD
• Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
• Communications Cable: USB, DB9 and EPO cabling included
• WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
• Network UPS Tools (NUT) Compatibility: NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite
• Network Management Card Description: Network management card optional
• Communications Interface: DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
• Transfer Time: 4 milliseconds (AC to battery mode), 2 milliseconds (Battery to AC mode)
• Low Voltage Transfer to Battery Power (Setpoint): 83
• High Voltage Transfer to Battery Power (Setpoint): 147
• Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
• High Availability UPS Features: Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation (AVR); Remote management; Surge/noise protection
• Green Energy-Saving Features: Individually controllable load banks
• Grounding Details: Back panel grounding lug
• UPS Applications: Large Network; High-End Desktop/Small Network; Retail/Point of Sale; Hospitality
• Product Certifications: CSA (Canada); NOM (Mexico); UL 1778
• Product Compliance: RoHS; FCC Part 15 Class B (USA)
• Product Warranty Period (Worldwide): 5-year limited warranty
• Connected Equipment Insurance (U.S., Canada & Puerto Rico): $250,000 Ultimate Lifetime Insurance