29+Years
29+Years
2 Available
Condition: New
3 Position 1 Circuit Push-Pull Switch - Stamped Brass
This Three Position One Circuit Push-Pull Switch features one circuit (normally Off), three position: Off/On/On. Pushed in all the way, the switch is off. Pulled to the first position, the first circuit is activated. In the second position, both the first and second circuits are activated. Ideal for cabin or running lights. Maximum panel thickness: 1”. Constructed of corrosion-resistant stamped brass. 15A @ 12VDC.
Specifications:
The Sea-Dog 3 Position 1 Circuit Push-Pull Switch (part number 420410-1) is a stamped brass component designed for straightforward electrical control in B2B applications. This switch offers a three-position, one-circuit configuration, operating with an Off/On/On sequence. When fully pushed in, the switch is off. Pulling it to the first position activates the first circuit, while pulling it to the second position activates both the first and second circuits. Constructed from corrosion-resistant stamped brass, it is suitable for environments where durability against corrosion is a requirement. It supports a maximum panel thickness of 1 inch and is rated for 15A at 12VDC, making it appropriate for controlling lighting systems such as cabin or running lights in various setups. This component provides a reliable, manual control interface for specific low-voltage DC applications.
This switch features three positions: Off (fully pushed in), On (first pull activates the first circuit), and On (second pull activates both the first and second circuits).
The switch is rated for 15 Amps at 12 Volts DC. It is designed for low-voltage direct current applications.
This switch is designed to fit panels with a maximum thickness of 1 inch.
The switch is constructed from corrosion-resistant stamped brass, suitable for environments where material durability is important.
420410-1 - Seadog Sea-Dog 3 Position 1 Circuit Push-Pull Switch - Stamped Brass
