SB122A-PH - Aic System RMC-4A3-50EH-0-200-A 4U 19 inch with 2 x 92 Fans 7xSlots 500 Watts Power Supply Brown Box

Motherboard
AIC Server Board Phoenix
AIC Server Board Phoenix
Processor
Processor Support : Two Intel Xeon Processors E5-2600 v3 and v4 product family
QPI Speeds : 9.6 GT/s, 8.0 GT/s, 7.2 GT/s
Socket Type : Socket R3 (FCLGA2011-3)
Chipset
Intel C612 Chipset
System Memory
12 DIMM slots across 8 memory channels
(4 memory channels per CPU 2 channels with 2DPC and 2 channels with 1DPC)
- 384GB DDR4 2133/1866 RDIMM DRx4
- 96GB DDR4 2133/1866 RDIMM SRx4
- 768GB DDR4 2133/1866 LRDIMM QRx4
- 1536GB DDR4 2133/1866 LRDIMM 3DS 8Rx4
Front Panel
Power on/off
System ID
System reset
USB 2.0 Type A connector
LEDs
Power
System ID
Alert
Drive Bays
External : 10 x 2.5 hot swap PCIe SSDs
Internal : 2 x 2.5 fixed SATA SSDs
Backplane
5 x 2-port PCIe backplanes with dual SFF-8643 connectors on each
Expansion Slots (PCIe 3.0)
1 x16, 1 x8
Riser Card (included)
PSG-RC-PH1U-2N-110 :
1U PCIe Gold finger x16 to 1 PCIe x16, 1 PCIe x8 and 10 PCIe x4 (SFF-8643) for NVMe
System BIOS
BIOS Type :
Insyde UEFI BIOS
SPI (Serial Peripheral Interface) FLASH Interface
BIOS Features :
ACPI
PXE
WOL
AC loss recovery
IPMI 2.0 KCS interface
SMBIOS
Serial console redirection
BIOS Boot Specification
BIOS Recovery Mode
SRIOV
PCIe Hotplug
iSCSI
TPM
PCIe NTB
On-board Devices
SATA :
Built-in SATA RAID controller on Intel C612 Chipset with software RAID support
IPMI :
Aspeed AST2400 Advanced PCIe Graphics Remote Management Processor
Baseboard Management Controller
Intelligent Platform Interface 2.0 (IPMI 2.0)
iKVM, Media Redirection, IPMI over LAN, Serial over LAN
SMASH Support
Network Controller :
Intel 82599ES 10 GbE Controller, dual port, SFP+, PCIe v2.0 (5.0GT/s)
Intel Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
Intel Ethernet Network Connection I217-LM, single port GbE, 1 Gbps
Graphics :
Aspeed AST2400 Advanced PCIe Graphics Remote Management Processor
PCIe VGA/2D Controller
1920x120060Hz 32bpp
Rear I/O
2 x 10 GbE SFP+
2 x RJ45
2 x USB 3.0 Type A
1 x VGA
1 x Serial
Power Supply
AC 850W 1+1 redundant high-efficiency power supply 80+
90-264VAC, 47-63 Hz
System Cooling
6 x 40x56mm 21500/18000 rpm hot swap fan modules
System Management
IPMI 2.0
KVM over IP
Media redirection
Temperature, fan, voltage, PSU sensor monitor
System temperature
System ID / System fail indicator
Remote power on/off/reset
SEL message alarm through mail
SNMP support
Intel NM
Environmental Specifications
Operating temperature : 0^o- 35^oC
System relative humidity : 5% - 95% (38^oC) non-condensing
MountingStandard : 28" tool-less slide rail
Item Dimension (L inchxW inchxH inch)
31 x 19 x 2