29+Years
29+Years
9 Available
Condition: New
Rubbing Compound Coarse - Step 1 - 32oz Fluid
Provides fast cut and leaves an excellent finish without swirl marks. This liquid compound and finishing material is designed to remove 600/800 wet sanding scratches from gelcoat. Use this with a buffer, followed by a coat of Sudbury Fine Compound.
The Sudbury Rubbing Compound Coarse (part number 444) is a liquid abrasive designed for initial surface preparation on gelcoat. This Step 1 compound is formulated to remove 600/800 wet sanding scratches efficiently. It provides a fast cut while aiming to leave a surface free of swirl marks, preparing it for subsequent finishing stages. This product is intended for use with a buffer and should be followed by an application of Sudbury Fine Compound to achieve the desired finish. It addresses the need for a robust solution to correct significant surface imperfections on gelcoat, making it suitable for businesses involved in marine maintenance, vehicle detailing, or manufacturing processes that require gelcoat restoration or finishing.
This coarse rubbing compound is specifically designed to remove 600/800 wet sanding scratches from gelcoat surfaces.
It is recommended to use this liquid compound with a buffer for application.
No, this is a Step 1 coarse compound. It should be followed by a coat of Sudbury Fine Compound to achieve the final finish.
The product comes in a 32oz fluid container.
444 - Sudbury Rubbing Compound Coarse - Step 1 - 32oz Fluid
