29+Years
29+Years
74 Available
Condition: New
The Rust-Oleum Multi-Purpose Pressure Wash Concentrate is a liquid cleaning solution designed for broad application across multiple surfaces. This concentrate, identified by part number RST 352251, is formulated with detergents, foaming surfactants, and dye, exhibiting a pH range of 12.5 to 13.5. It functions as a remover for grease, grime, mold, oil, fungi, algae, stains, and mildew. The product is bleach-free, scrub-free, and anti-corrosive, offering fast-acting properties. It is suitable for businesses and IT departments managing facilities that require effective, high-volume surface cleaning. This 128 fl oz (4 quart) concentrate can be applied manually or via a pressure washer, addressing common surface contaminants without requiring extensive manual scrubbing.
DIRECTIONS - MANUAL APPLICATION
Always test on an inconspicuous area first. Rinse surrounding vegetation with water before and after application.
1. Rinse surface with water.
2. Dilute concentrate 1:19 in a pump-up sprayer (approximately 7 oz. of concentrate with 1 gallon of water).
3. Working in small sections, apply solution to surface with a soft bristle brush or pump-up sprayer.
4. Wait 3-5 minutes. Do not allow solution to dry on surface.
5. With hose at highest pressure, rinse surface with water.
6. Move to new section and repeat steps 1-5.
DIRECTIONS - PRESSURE WASHER APPLICATION
Always test on an inconspicuous area first. Rinse surrounding vegetation with water before and after application.
1. Rinse surface with water.
2. Place detergent application siphon tube and screen filter directly into solution. Open meter valve (if applicable) for maximum product flow. For reservoir machines, pour concentrate (full strength) directly into pressure washer.
3. Working in small sections, apply solution to surface using low pressure spray nozzle. For vertical surfaces, apply bottom to the top.
4. Wait 3-5 minutes. Do not allow solution to dry on surface.
5. Remove siphon tube from solution and rinse surface from top to bottom with high pressure.
6. Move to new section and repeat steps 1-5.
7. Before storage, rinse pressure washer parts thoroughly with water.
This concentrate is recommended for removing grease, grime, mold, oil, fungi, algae, stains, and mildew from various surfaces.
The concentrate has a pH range between 12.5 and 13.5, indicating its alkaline nature.
Yes, the concentrate is designed for both manual application and use with a pressure washer. Specific directions are provided for both methods.
Yes, the Rust-Oleum Multi-Purpose Pressure Wash Concentrate is formulated to be bleach-free and scrub-free, offering fast-acting cleaning without requiring manual scrubbing.
RST 352251 - Rust-oleum Corporation Rust-Oleum Multi-Purpose Pressure Wash Concentrate - For Multipurpose, Multi Surface
