6 Available
/ 4 Sold
Condition: New
Synology RackStation RS3618xs SAN/NAS Storage System - Intel Xeon D-1521 Quad-core (4 Core) 2.40 GHz - 12 x HDD Supported - 144 TB Supported HDD Capacity - 12 x SSD Supported - 8 GB RAM DDR4 SDRAM - Serial ATA Controller0, 1, 5, 6, 10, Basic, JBOD, RAID F1 - 12 x Total Bays - 12 x 2.5"/3.5" Bay - 2 x Total Slot(s) - Gigabit Ethernet - 2 USB Port(s) - 2 USB 3.0 Port(s) - Network (RJ-45) - DiskStation Manager - iSCSI, DLNA, AFP, CIFS, Kerberos, FTP, HTTP, RSync, NFS, SMB - 2U - Rack-mountable
| CPU | |
|---|---|
| CPU Model | Intel Xeon D-1521 |
| CPU Architecture | 64-bit |
| CPU Frequency | Quad Core 2.4 (base) / 2.7 (turbo) GHz |
| Hardware Encryption Engine (AES-NI) | yes |
| Memory | |
| System Memory | 8 GB DDR4 ECC UDIMM |
| Memory Module Pre-installed | 8GB (1 x 8GB) |
| Total Memory Slots | 4 |
| Memory Expandable up to | 64 GB (16 GB x 4) |
| Storage | |
| Drive Bays | 12 |
| Maximum Drive Bays with Expansion Unit | 36 |
| Compatible Drive Type (See all supported drives) | 3.5inch SATA HDD |
| Maximum Internal Raw Capacity | 144 TB (12 TB drive x 12) (Capacity may vary by RAID types) |
| Maximum Raw Capacity with Expansion Units | 432 TB (144 TB + 12 TB drive x 24) (Capacity may vary by RAID types) |
| Maximum Single Volume Size | 200 TB (32GB RAM required, for RAID 5 or RAID 6 groups only) |
| Hot Swappable Drive | yes |
| External Ports | |
| RJ-45 1GbE LAN Port | 4 (with Link Aggregation / Failover support) |
| USB 3.0 Port | 2 |
| Expansion Port | 2 |
| PCIe | |
| PCIe Expansion | 2 x Gen3 x8 slots (x8 link) |
| Add-in-card supportPCIe | Network Interface Card |
| File System | |
| Internal Drives | Btrfs |
| External Drives | Btrfs |
| Notes | exFAT Access is purchased separately in Package Center. |
| Others | |
| System Fan | 80 mm x 80 mm x 4 pcs |
| Fan Speed Mode | Full-Speed Mode |
| Easy Replacement System Fan | yes |
| Power Recovery | yes |
| Noise Level | 50.2 dB(A) |
| Scheduled Power On/Off | yes |
| Wake on LAN/WAN | yes |
| Power Supply Unit / Adapter | 500W |
| AC Input Power Voltage | 100V to 240V AC |
| Power Frequency | 50/60 Hz, Single Phase |
| Power Consumption | 142.76 W (Access) |
| British Thermal Unit | 487.12 BTU/hr (Access) |
| Environment Temperature | |
| Operating Temperature | 5oC to 35oC (40oF to 95oF) |
| Storage Temperature | -20oC to 60oC (-5oF to 140oF) |
| Relative Humidity | 5% to 95% RH |
| Certification | EAC |
| Notes | Power consumption is measured when fully loaded with Western Digital 1TB WD10EFRX hard drive(s). |
| Noise Level Testing Environment | Fully loaded with Seagate 2TB ST2000VN000 hard drive(s) in idle Two G.R.A.S. Type 40AE microphones, each set up at 1 meter away from the Synology NAS front and rear Background noise: 16.49-17.51 dB(A) Temperature: 24.25-25.75oC Humidity: 58.2-61.8% |
| Storage Management | |
| Maximum Internal Volume Number | 1024 |
| Maximum iSCSI Target Number | 64 |
| Maximum iSCSI LUN | 512 |
| iSCSI LUN Clone/Snapshot, Windows ODX | yes |
| SSD Read/Write Cache (White Paper) | yes |
| SSD TRIM | yes |
| RAID Group | yes |
| Supported RAID Type | RAID F1 |
| RAID Migration | Basic to RAID 1 |
| Volume Expansion with Larger HDDs | RAID F1 |
| Volume Expansion by Adding a HDD | RAID F1 |
| Global Hot Spare Supported RAID Type | RAID F1 |