29+Years
29+Years
14 Available
Condition: New
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
The Rule-Mate 2000 GPH Fully Automated Bilge Pump is a 12V solution designed for marine applications requiring autonomous water removal. This unit integrates a Rule bilge pump with an intelligent circuit board within a single housing. It activates automatically when water levels reach 2-1/2 inches and deactivates when water against the impeller is no longer detected, reducing water to approximately 5/8 inch. A key feature is its built-in intelligence, which senses if the pump is running without moving water. In such cases, like when debris fouls the sensor or the pump is air-bound, the system will stop and then periodically check for water every 2-1/2 minutes, protecting the pump and the vessel's battery. Once the obstruction is cleared, normal operation resumes. This RM2000A model offers a 2000 GPH (7570 LPH) flow rate at 0' (13.6V) and includes an extra-long life heavy-duty motor. It features a 1" NPS discharge with both 1" and 1 1/8" screw-on ports.
The Rule-Mate 2000 GPH Fully Automated Bilge Pump provides a flow rate of 2000 GPH (7570 LPH) at 0' (13.6V).
The pump features a 1" NPS discharge and comes with both 1" and 1 1/8" screw-on ports for connection flexibility.
The pump activates when water reaches 2-1/2 inches and automatically shuts off when it senses no water against the impeller, reducing the remaining water level to approximately 5/8 inch.
Rule-Mate Intelligence detects if the pump is running but not moving water, such as due to debris or air-binding. It will stop the pump and then periodically check for water every 2-1/2 minutes, which helps protect the pump and the vessel's batteries.
RM2000A - Rule-Mate® 2000 GPH Fully Automated Bilge Pump - 12V
