RA-2 - Newmar Power Newmar RA-2 Cable FEED-THRU 0.27-0.35 Inch Cable Diameter

RA Series Right Angle Waterproof Feed-Thru Fittings

Route cables at 90° through vertical and horizontal surfaces with wall
hugging low profile design that keeps cable secured close to the surface reducing intrusion with personnel or other equipment / cables.

Molded of nylon, the Sculpted shape has no sharp edges and provides
radiused 90° feed-thru bend in cables without damage.

Easy installation: slide silicone compression rings on cable, mount base piece with waterproof gasket then attach sealing end cap to create an IP 65 waterproof seal. Note cable must be routed without end connector attached.

Three models to accommodate wide range of cable diameters.

The Newmar Power RA-2 Cable Feed-Thru is a right-angle, waterproof fitting designed for routing cables through vertical or horizontal surfaces. This component facilitates a 90-degree cable bend, maintaining a low profile to minimize interference with personnel or other equipment. Constructed from nylon, its sculpted design ensures cables are routed without damage due to sharp edges. The RA-2 is suitable for cables with an outer diameter ranging from 0.27 to 0.35 inches. Installation involves sliding silicone compression rings onto the cable, mounting the base with a waterproof gasket, and then attaching the sealing end cap to achieve an IP65 waterproof seal. This feed-thru is intended for applications where cables need to be securely routed and protected from water ingress, particularly in environments requiring a neat, wall-hugging cable management solution. Note that cables must be routed without an end connector attached.