R181-T92 - Gigabyte Server R181-T92 1U 10Bay Marvell ThunderX2 CN9980 ARM 10x2.5HS RTL

1U
Motherboard
MT91-FS4
CPU
2 x Marvell ThunderX2 CN9980 ARM processors
64bit ARMv8 architecture
32 cores per processor, 2.2GHz, TDP 180W
16nm technology
Chipset
-
Memory
24 x DIMM slots
DDR4 memory supported only
8-channel memory architecture per processor
RDIMM modules up to 64GB supported
1.2V modules: 2666/2400/2133 MHz
- NOTE: GIGABYTE recommends to follow the QVL when selecting memory modules to avoid any system compatibility issues
- NOTE: DDR4 2666 Mhz with 1DPC, DDR4 2400 with 2DPC
LAN
2 x 10Gb/s SFP+ LAN ports (QLogic QL41102)
1 x 10/100/1000 management LAN port
Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp, DDR4 SDRAM
Audio
-
Storage
10 x 2.5" hot-swappable HDD bays
Onboard Broadcom SAS3008 controller
Supports 8 x SAS / 2 x SATAIII or 10 x SATAIII hard drives
- NOTE: GIGABYTE recommends to follow the QVL when selecting hard drives to avoid any system compatibility issues
SAS
Supported
RAID
RAID 0/1/1E/10
Peripheral Drives
-
Expansion Slots
Riser Card CRS1021:
- 2 x PCIe x8 slots (Gen3 x8), Low profile half-length
Riser Card CRS1015:
- 1 x PCIe x16 slot (Gen3 x16), Low profile half-length
2 x OCP mezzanine slots
- PCIe Gen3 x16
- Type1, P1, P2, P3, P4
Internal I/O
2 x Power supply connectors
2 x SlimSAS connectors
2 x SATA 7-pin connectors
1 x USB 3.0 header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS switch
1 x BIOS recovery switch
Front I/O
1 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Rear I/O
2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x SFP+
1 x MLAN
1 x ID button with LED
Backplane I/O
10 x SATA/SAS ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
TPM
-
Power Supply
2 x 1200W redundant PSUs
80 PLUS Platinum
AC Input:
- 100-240V-/ 12-7A, 50-60Hz
DC Input:
- 240Vdc/ 6A
DC Output:
- Max 1000W/ 100-240V-
+12V/ 80.5A
+12Vsb/ 3A
- Max 1200W/ 200-240V- or 240Vdc input
+12V/ 97A
+12Vsb/ 3A
System Management
Aspeed AST2500 management controller Avocent MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM and vMedia (HTML5)