MM-9N - Airmar Cable for Simrad XSONIC Non-CHIRP 600W

MM-9N Cable for Simrad XSONIC Non-CHIRP 600W Transducers

Designed for the 600W Mix and Match transducers, this cable features a common base with a short (2m) cable and an interchangeable longer (8m) adapter cable customized for various electronics brands. The attached pigtail connects with an Airmar 5-pin male connector, while the adapter cable has a matching Airmar 5-pin female connector on one end and the appropriate connector for a specific brand on the other.

Both components are essential for installation. If the equipment brand changes, the transducer remains in place and only the adapter cable needs to be swapped out.

Note: 600W Mix and Match cables are incompatible with 1kW or CHIRP transducers.

The Airmar MM-9N cable is designed for use with Simrad XSONIC Non-CHIRP 600W transducers. This product addresses the need for a flexible connectivity solution in marine IT environments, particularly for businesses utilizing Simrad HDS Carbon or evo 3 systems. It comprises a 2-meter common base cable with an Airmar 5-pin male connector and an 8-meter interchangeable adapter cable. This design allows for the transducer to remain installed while only the adapter cable is replaced if the connected electronics brand changes, streamlining maintenance and upgrades. The cable provides depth-only functionality via a 9-pin connector. It is specifically engineered for 600W Mix and Match transducers and is not compatible with 1kW or CHIRP transducer systems. This setup is suitable for IT professionals managing marine electronics where adaptability and focused functionality are key considerations.