MBD-X11SSQ-L-O - Supermicro X11SSQ-L, MICRO ATX, INTEL H110 EXPRESS, LGA1151, DDR4 SDRAM, MAX: 32 GB, PCI EXPRES

Physical Stats
Form Factor
Micro-ATX

Processor/Cache
CPU
Intel 6th Generation Core^TM i3 series
Intel 6th Generation Core^TM i5 series
Intel 6th Generation Core^TM i7 series
Intel 7th Generation Core^TM i3 series
Intel 7th Generation Core^TM i5 series
Intel 7th Generation Core^TM i7 series
Intel Celeron
Intel Pentium
Socket H4 (LGA 1151) supported, QPI up to 5.0GT/s, CPU TDP support Up to 91W
Note
BIOS version 2.0 or above is required to support 7th Generation Intel Core^TM Processors

System Memory
Memory Capacity
Up to 32GB Unbuffered non-ECC UDIMM, DDR4-2400MHz, in 2 DIMM slots
Memory Type
2400/2133/1866MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes
4GB, 8GB, 16GB
Memory Voltage
1.2V

On-Board Devices
Chipset
Intel H110
SATA
Intel H110 controller for 4 SATA3 (6 Gbps) ports,
Intel RST
Network Controllers
Single Intel PHY I219LM LAN controller
Audio
ALC 888S HD Audio
Graphics
Intel HD Graphics
2 Independent Displays

Input / Output
USB
6 USB 2.0 ports (2 rear, 4 via header(s))
4 USB 3.0 ports (2 rear, 2 via header(s))
Video Output
1 HDMI port(s), 1 DP (DisplayPort) port(s), 1 DVI - D port(s)
Serial Port / Header
2 COM Ports (2 header(s))
TPM
TPM Header
Others
Force On mode by jumper and AC recovery

Expansion Slots
PCI-E
1 PCI-E 3.0 x16
1 PCI-E 2.0 x4
1 PCI-E 2.0 x1
PCI-E 2.0 x4 with open slot

System BIOS
BIOS Type
AMI UEFI
BIOS Features
Plug and Play (PnP)
DMI 2.3
USB Keyboard support
Hardware BIOS Virus protection
UEFI 2.3.1
ACPI 5.0
SMBIOS 3.0
PCI 3.0

Management
Software
NMI
SuperDoctor 5
Watchdog
Power Configurations
ACPI Power Management
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Force Power On by Jumper

PC Health Monitoring
Voltage
+12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
FAN
4x 4-pin fan headers (up to 4 fans)
Overheat LED indication
Pulse Width Modulated (PWM) fan connectors
PWM fan speed control
System level control
Thermal control tachometer fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Standby alert LED
Other Features
ACPI power management
ATX Power connector
Chassis intrusion header
Control of power-on for recovery from AC power loss
CPU thermal trip support for processor protection
RoHS
System level control
WOL

Operating Environment
Operating Temperature Range
0^oC - 60^oC (32^oF - 140^oF)
Non-Operating Temperature Range
-20^oC - 60^oC (-4^oF - 140^oF)
Operating Relative Humidity Range
10% - 85% (non-condensing)
Non-Operating Relative Humidity Range
10% - 95% (non-condensing)

Weight
3.00lb

Warranty Information
1 Year