Form Factor Mini-ITX Processor/Cache CPU: - Intel Xeon processor D-1557 - FCBGA 1667 supported - CPU TDP support 45W, 18MB, 12 Cores, 24 Threads System Memory Memory Capacity: - 4x DDR4 DIMM sockets - Supports up to 128GB DDR4 ECC RDIMM - Supports up to 64GB DDR4 ECC/non-ECC UDIMM Memory Type: 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM DIMM Sizes: 32GB, 16GB, 8GB, 4GB Memory Voltage: 1.2 V Error Detection: - Corrects single-bit errors - Detects double-bit errors (using ECC memory) On-Board Devices Chipset: System on Chip SATA: SoC controller for 6 SATA3 (6Gbps) ports RAID 0,1,5,10 RSTe Network Controllers: - Dual LAN via Intel i350-AM2 Gigabit Ethernet - Dual LAN via SoC 10GBase-T - Virtual Machine Device Queues reduce I/O overhead - Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output - 1 Realtek RTL8201N PHY (dedicated IPMI) IPMI: - Support for Intelligent Platform Management Interface v.2.0 - IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Video: Aspeed AST2400 TPM: TPM header Input / Output SATA: 6 SATA3 (6Gbps) ports LAN: - 2 RJ45 10GBase-T ports - 2 RJ45 Gigabit Ethernet LAN ports - 1 RJ45 Dedicated IPMI LAN port USB: - 2 USB 3.0 ports (rear) - 4 USB 2.0 ports (via headers) Video: - 1 VGA port Serial Port / Header: 1 COM port (header) DOM: 1 SuperDOM (Disk on Module) power connector Chassis (Optimized for X10SDV-12C-TLN4F) 1U Chassis: - SC505-203B - SC504-203B Important Chassis Notes: To support the new generation Intel Xeon processor-based motherboards, Revision N chassis is recommended. Please talk to your sales representative for details. Expansion Slots PCI-Express: 1 PCI-E 3.0 x16 slot M.2: - Interface: PCI-E 3.0 x4 - Form Factor: M Key 2242/2280 - Support SATA devices System BIOS BIOS Type: 128Mb SPI Flash with AMI BIOS BIOS Features: - PCI 3.0 - ACPI 5.0 - USB Keyboard support - Hardware BIOS Virus protection - SMBIOS 2.8 - UEFI 2.4 - RTC (Real Time Clock) Wakeup Management Software: - IPMI 2.0 - KVM with dedicated LAN - NMI - SUM - SuperDoctor 5 - Watch Dog Power Configurations: - ACPI / APM Power Management - CPU Fan auto-off in sleep mode - Power-on mode for AC power recovery PC Health Monitoring Voltage: Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control FAN: - Total of four 4-pin fan headers supporting tachometer status monitoring - Dual Cooling Zone - Status monitor for speed control - Status monitor for on/off control - Low noise fan speed control - Pulse Width Modulated (PWM) fan connectors Temperature: - Monitoring for CPU and chassis environment - CPU thermal trip support - Thermal Monitor 2 (TM2) support - PECI LED: CPU / System Overheat LED Other Features: - Chassis intrusion detection - Chassis intrusion header - 12V DC or ATX Power Source - RoHS Operating Environment Operating Temperature Range: 0oC - 60oC (32oF - 140oF) Item Dimension ( L inchxW inchxH inch) NA Weight 5.00 lb Warranty Information 3 Years