MBD-H11SSW-IN-B - Supermicro Motherboard MBD-H11SSW-IN-B AMD EPYC 7000 SP3 2TB DR4 2666MHz SATA PCIE Bulk

Physical Stats
Form Factor: Proprietary
Dimensions: 13.4" x 12.29" (34cm x 31.2cm) Processor/Chipset
CPU:
Single AMD EPYC 7000-series Processor
Socket SP3
Cores: Up to 32 Cores
Chipset: System on Chip System Memory
Memory Capacity:
16 DIMM slots
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage: 1.2V
Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory) On-Board Devices
SATA: SATA3 (6 Gbps)
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers:
2x 1GbE LAN Ports via Broadcom BCM5720L
1 Realtek RTL8211E PHY (dedicated IPMI)
VGA: ASPEED AST2500 BMC Input / Output
SATA: 2 SATA3 (6 Gbps) ports
SATA/NVMe Hybrid: 16 SATA3 / 4 NVMe
NVMe: 12 NVMe
LAN:
2 RJ45 1GbE Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:
7 USB 3.0 ports
(4 rear + 2 front + 1 Type A)
VGA: 1 VGA port
Others:
2 COM ports (rear)
2 SATA DOM power connectors
1 TPM 2.0 header
1 TPM 1.2 header Input / Output
SATA: 2 SATA3 (6 Gbps) ports
SATA/NVMe Hybrid: 16 SATA3 / 4 NVMe
NVMe: 12 NVMe
LAN:
2 RJ45 1GbE Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:
7 USB 3.0 ports
(4 rear + 2 front + 1 Type A)
VGA: 1 VGA port
Others:
2 COM ports (rear)
2 SATA DOM power connectors
1 TPM 2.0 header
1 TPM 1.2 header Chassis ( Optimized for H11SSW-iN )
2U: SC213AC8-R1K23WB System BIOS
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features:
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1 Management
Software:
Super Doctor 5
Watch Dog
NMI
SUM
IPMI 2.0, KVM with dedicated LAN
Power Configurations:
ACPI Power Management
Power-on mode control for AC power loss recovery PC Health Monitoring
CPU:
Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
CPU switching voltage regulator
Supports system management utility
VBAT
FAN:
Up to 6-fan status tachometer monitoring
Up to 6 4-pin fan headers
Dual Cooling Zone
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 6x Fan connectors
I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features:
Chassis Intrusion Detection
Chassis Intrusion Header
UID Operating Environment / Compliance
Environmental Specifications:
Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) Item Dimension (L"xW"xH")
15 x 4 x 2

Weight
3 lbs

Warranty Information
1 year