29+Years
29+Years
8 Available
Condition: New
Icom M605 VHF AIS Receiver fixed mount with color display and rear mic connector
Model: M605 41 USAAll functions of the IC-M605 (including DSC and distress operation) can be remotely controlled with up to three controllers, RC-M600 COMMAND HEAD and/or HM-195 series COMMANDMICTM, with an intercom function available among the main radio and controllers. The system allows for maximum operating flexibility anywhere on your boat.
A combination of the directional keypad and soft keys provides simple operation. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables you to smoothly enter channel numbers, MMSI numbers with ID names and so on.
The IC-M605's internal speaker enhances intelligibility of received calls. The waterproof, paper speaker-cone provides superior sound quality with a wide frequency range and a flat frequency response for powerful, yet clear audio.
A weak signal adjacent to a strong signal can be clearly received by the IC-M605. Its commercial grade receiver performance (selectivity and IMD: more than 80 dB) provides reliable communication at all times.
The GNSS (GPS, GLONASS and SBAS) receiver is integrated in the IC-M605. Position information can be simply received with connection to the supplied GNSS antenna with 5 m cable, UX-241.
The Active Noise Canceling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.
When connected to the optional horn speaker, SP-37, you can talk with crews on the deck or shore from the radio's microphone and can hear any reply via the horn speaker. Also available the RX hailer function and four patterns of automatic foghorn.
The last call voice recording function automatically saves up to two minutes of an incoming call. Don't miss any incoming messages.
Using NMEA 2000TM connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000TM data for other equipment
With an optional voice scrambler unit, UT-112, the IC-M605 provides 32 tone secure conversation. This function is useful when you want to share private information with consort ships.
With an integrated AIS receiver, the IC-M605 can show real-time AIS vessel traffic information on the display. The AIS combo screen enables you to monitor the AIS plotter during basic operation. You can directly call a selected AIS target from the AIS screen using an individual DSC call.
Specifications| USA, CAN, INT, WX channels | |
| Operating temperature range | -20 degC to +60 degC; -4 degF to +140 degF |
| Antenna impedance | 50 ? (SO-239) |
| Transmitter | |
| Output power (at 13.8 V DC) | 25 W, 1 W |
| Max. frequency deviation | +/- 5 kHz |
| Frequency tolerance | +/- 5 ppm |
| Spurious emissions | Less than -70 dBc (at 25 W) |
| Residual modulation | More than 40 dB |
| Adjacent channel power | More than 70 dB |
| Receiver | |
| Intermediate frequency CH70 | 30.15 MHz, 450 kHz (1st/2nd) 21.70 MHz, 450 kHz (1st/2nd) |
| Sensitivity (at 12 dB SINAD) CH70 (1% BER) | 0.22 uV typical 0.71 uV emf typical |
| Adjacent channel selectivity CH70 (1% BER) | More than 80 dB More than 80 dBu emf |
| Spurious response CH70 (1% BER) | More than 77 dB More than 73 dBu emf |
| Intermodulation CH70 (1% BER) | More than 80 dB More than 73 dBu emf |
| Hum and noise | More than 40 dB |
| Audio output power (at 10% distortion) | More than 15 W with a 4 ? external speaker |
| Input Voltage | 13.8 V DC (11.7-15.9 V DC) |
| Input Draw | Tx 25 W output 6A Rx Max. audio 8A |
The Icom M605 25W VHF AIS Rear Mic Connector is a fixed-mount marine radio designed for business and IT buyers managing vessel communications. This unit integrates a VHF AIS receiver with a 4.3-inch color TFT LCD, providing real-time AIS vessel traffic information. It is suitable for maritime operations requiring reliable voice communication and vessel tracking capabilities. Key features include NMEA2000TM and NMEA0183 connectivity for network integration, Class D DSC for distress calls, and active noise canceling to enhance audio clarity in noisy environments. The M605 41 USA model also offers a 30W listen-back hailer, last call voice recording, and IPX8 submersion rating. Its intuitive interface, night mode, and dual/tri-watch functions support operational efficiency. This radio addresses the need for robust, clear, and integrated communication systems on commercial or large recreational vessels.
The Icom M605 features NMEA2000TM and NMEA0183 connectivity, allowing it to exchange GNSS, AIS reports, DSC call information, radio frequency, and PGN list data on a network. It can also convert NMEA 0183/-HS GNSS position data to NMEA 2000TM data.
The Icom M605 is supplied with a speaker microphone (HM-205RB) that connects to the rear panel, and a GNSS antenna (UX-241) with a 5m cable for position information.
Yes, all functions of the Icom M605, including DSC and distress operation, can be remotely controlled with up to three optional controllers, such as the RC-M600 COMMAND HEAD and/or HM-195 series COMMANDMICTM. An intercom function is available among the main radio and controllers.
The Icom M605 features a 4.3-inch wide color TFT LCD. It also includes a night mode for readability in dark conditions.
M605 41 USA - Icom M605 25W VHF AIS Rear Mic Connector
