000-11749-001 - Navico Group Lowrance Outboard Pilot Cable Steered

Lowrance Outboard Pilot Cable-Steer Pack

Available for HDS Gen2 Keypad units only (*available Q2 for HDS Gen2 Touch and HDS Gen3)

Model: 000-11749-001
UPC: 9420024134320

• Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 display.
• New Lowrance SmartSteer interface provides control of both your cable-steer outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor.
• "One-touch" route creation from saved trails.
• Repeat your path with automatic turn patterns.
• Recommended for single-outboard setups, on boats that are 30 feet and less, in length.
• VRF (Virtual Rudder Feedback) - simplifies pilot installation -- eliminating the need for a rudder position sensor.
• Easy setup - straightforward guide steps you through first-time install.
• Easy-to-install, plug-and-socket connection - with no complex terminal wiring.
• Supported by Lowrance Advantage Service program
• Lowrance Outboard Pilot Cable-Steer Pack replaces the manual helm-drive unit.
• Morse 290, Morse 304411 and Teleflex SSC52 cable compatibility
• Helm-1 is only compatible with the NAC-1.Helm-1 includes variable-voltage feedback interface

ALL NEW autopilot pack for Lowrance High Definition System (HDS) displays, providing automatic steering for cable-steer outboard motors. An extra pair of hands when you need it, the Outboard Pilot, featuring Lowrance SmartSteer control from your HDS Gen2, will steer to a heading, waypoint or route.

Everything you need in one box to fit an autopilot to your cable-steer outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading. The Lowrance SmartSteer user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes - so you can retrace a previous track and get your boat back to the dock from your fishing area.

The Lowrance Outboard Pilot is recommended for single outboard set-ups, on boats that are 30 feet and less, in length.

What's in the Box:

• NAC-1 Autopilot Computer 000-11769-001 - The brains behind your Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor
• Helm-1 -1 Cable-steer helm drive unit 000-11771-001
• Point-1AP Heading and GPS Sensor - Provides extremely accurate and rapid boat position update, along with heading for accurate boat direction at any speed
• Auto/Standby Button - Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press.

The Lowrance Outboard Pilot Cable Steered system, part number 000-11749-001, provides automatic steering for cable-steer outboard motors. This system is designed for single-outboard setups on boats 30 feet or less in length. It integrates with Lowrance HDS Gen2 Keypad units (and will support HDS Gen2 Touch and HDS Gen3 in Q2) to allow users to steer to a heading, waypoint, route, or cursor directly from their HDS display. The SmartSteer interface enables control of both cable-steer outboards and MotorGuide Xi5 Pinpoint electric-steer trolling motors. Key features include 'one-touch' route creation from saved trails and automatic turn patterns for repeating paths. The system utilizes Virtual Rudder Feedback (VRF) to simplify installation by eliminating the need for a rudder position sensor. Installation is straightforward with plug-and-socket connections, requiring no complex terminal wiring.