15116-101 - Lenco Marine Solutions Llc Lenco 12inx12in Edge Mount Trim Tab Kit 12v Electro Polished

Lenco 12x12" Edge Mount Trim Tab Kit 12v Electro Polished

All the same features of the Edge Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12 in (30.5 cm) blades giving them a 3 in (7.6 cm) lower mounting height. Boat Lengths 14 feet (4.3 m) to 30 feet (9.1 m). Blades are constructed of Electro-Polished 12 gauge (2.7 mm) laser cut 304 stainless steel with a 1 in (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8 in (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

• (2) 12-gauge stainless steel Electro-Polished blades
• (2) 15054-001 actuators with 6 feet (1.8 m) leads and Deutsch connectors
• (2) 30133-103 actuator extension wiring harnesses - 20 feet (6.1 m) length
• (2) 15085-001 upper mounting brackets with gland seal
• (2) 50014-001 lower mounting brackets
• Lenco owner's/installation manual
• Stainless steel mounting hardware
"

The Lenco 12inx12in Edge Mount Trim Tab Kit provides boat owners with a solution for optimizing vessel performance and stability. This 12V electro-polished system is designed for boats ranging from 14 to 30 feet in length, addressing common issues such as porpoising, listing, and bow rise. The kit features 12-gauge laser-cut 304 stainless steel blades, which are electro-polished for enhanced corrosion resistance and a mirror finish. The actuators mount at the trailing edge of the blades, allowing for a lower mounting height of 3 inches. This design is suitable for transoms with a minimum height of 11 inches. Included components facilitate a complete installation, offering a practical upgrade for improved handling and fuel efficiency. The part number for this kit is 15116-101.